Design of cold formed steel members.

Ardanuc, Ilker


Design of reinforced concrete members by the strut-and-tie method
Matraji, Mounir; Atımtay, Ergin; Department of Civil Engineering (1997)
Design of cinnamon oil coated active paper sheets
Akbaş, Derya; Öztop, Halil Mecit; Şahin, Serpil; Department of Food Engineering (2017)
In the first part of this study, poly(lactic acid)-poly(ethylene glycol), PLA-PEG, blends, composites and electrospun fibers of PLA and PLA composites, PLA-PEG blends and PLA-PEG, blends composites were prepared and characterized. X-ray Diffractometer (XRD), Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), Gel Permeation Chromatography (GPC), Simultaneous Thermal Analyzer (STA) and Direct Pyrolysis Mass Spectrometer (DP-MS) techniques were used for characterization studies. Both T...
Design of stepped impedance transformers with large number of sections.
Çoğun, Ferrin; Department of Electrical Engineering (1984)
Design of crank-rocker type four bar mechanisms for input-output curve generation
Gökkuş, Erdem; Söylemez, Eres; Department of Mechanical Engineering (1993)
Design of a car door window regulator
Özsipahi, Mümin; Söylemez, Eres; Department of Mechanical Engineering (2009)
In this thesis, design of a car door window regulator is presented. This design comprises a mechanism in order that the car door window makes a specified translational motion. First, conceptual design is carried out to obtain the best suitable concept for the design and best suitable concept comes out to be a scissor mechanism. Afterwards, detailed design of the chosen concept is given. In the detail design stage, kinematic synthesis of the mechanism is performed basically using the Cardan motion. Lastly, i...
Citation Formats
I. Ardanuc, “Design of cold formed steel members.,” Middle East Technical University, 1973.