Lowering of clinkering temperature by the addition of boron compounds.

1977
Kayı (Oktaykan), Füsun

Suggestions

Reduction of insulation levels with ZnO lighting arresters.
Soral, Levent; Department of Electrical Engineering (1987)
Reduction of superelevation in steep sloped curved channels.
Altinakar, S. Mustafa; Department of Civil Engineering (1980)
REDUCTION OF TORQUE OSCILLATIONS IN INDUCTION-MOTORS, DUE TO SWITCHING OF THE SUPPLY, BY INITIAL FLUX SETTLEMENT
NALCACI, AE (1994-04-14)
A new method for reduction of transient torques in a three phase induction motor, for starting from rest is described. In this method an initial DC current in the stator windings is necessary. The procedure to find the necessary amount of this current is explained. The method is also tested in a digital simulation and compared with one of the previously proposed methods
Reduction in alkali-silica expansion due to steel microfibers
Turanlı, Lutfullah; Shomglin, K; Ostertag, CP; Monteiro, PJM (2001-05-01)
The alkali-silica reaction (ASR) produces an expansive gel that may cause cracking and displacement in concrete structures. Steel microfibers ranging from 1% to 7% by volume of cement mortar were incorporated to reduce the expansion and cracking. All specimens contained 5% of opal by weight of fine aggregates. The samples were cast and tested according to ASTM C-1260. A considerable reduction in expansion was observed for all steel microfiber-reinforced mortar specimens compared to the control specimens wit...
Reduction of Lateral Earth Pressure by EPS Geofoam Inclusions
ERTUĞRUL, ÖZGÜR LÜTFİ; Trandafir, Aurelian C.; Özkan, M. Yener (2012-04-01)
Reduction of Lateral Earth Pressure by EPS Geofoam Inclusions
Citation Formats
F. Kayı (Oktaykan), “Lowering of clinkering temperature by the addition of boron compounds.,” Middle East Technical University, 1977.