A novel red to transmissive electrochromic polymer based on phenanthrocarbazole

Date

2016-01-01

Author

Atakan, Gizem
Günbaş, Emrullah Görkem

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

169
views

0
downloads

A novel red to transmissive electrochromic polymer is described. A monomer which consists of EDOT and phenanthrocarbazole units was designed. Upon electrochemical polymerization of this material, a red colored polymer film was formed, which upon oxidation switches to a highly transmissive state. A high optical contrast (51%) and fast switching times (0.65 s and 0.52 s) were achieved, making this polymer an important candidate for electrochromic device and simple display applications. In addition, to best of our knowledge, this is the first example of a phenanthrocarbazole containing electrochromic polymer.

Subject Keywords

General Chemistry, General Chemical Engineering

URI

https://hdl.handle.net/11511/43322

Journal

RSC ADVANCES

DOI

https://doi.org/10.1039/c6ra03367a

Collections

Department of Chemistry, Article

Suggestions

OpenMETU
Core

A novel electrochromic and fluorescent polythienylpyrrole bearing 1,1 '-bipyrrole CİHANER, ATİLLA; Mert, Olcay; Demir, Ayhan Sıtkı (Elsevier BV, 2009-01-30) A novel conducting polymer was successfully synthesized via electropolymerization of 1-(1H-pyrrol-1-yl)-2,5-di(thiophen-2-yl)-1H-pyrrole. The electrochemical and electro-optical properties of the corresponding polymer, which was the first example of polymer containing 1,1'-bipyrrole units, were elaborated using electroanalytical and spectroscopic techniques. Cyclic voltammograms and electro-optical studies showed that the polymer has a stable and well-defined reversible redox process as well as electrochrom...
Synthesis of a novel fluorescent and ion sensitive monomer bearing quinoxaline moieties and its electropolymerization Carbas, Buket Bezgin; KIVRAK, Arif; Zora, Metin; Önal, Ahmet Muhtar (Elsevier BV, 2011-05-01) A novel terthienyl based fluorescent polymer bearing pendant quinoxaline moieties directly attached to the 3-positions of the central thiophene ring was synthesized by electrochemical polymerization of 4-((2,5-dithiophen-2-yl)thiophen-3-yl)pyrrolo[1,2-a]quinoxaline (TT-Q). The corresponding polymer was characterized by cyclic voltammetry, FT-IR and UV-vis spectroscopy. The polymer exhibits a reversible redox behavior (Ep(1/2) = 1.05 V) accompanied with a reversible electrochromic behavior; yellowish orange ...
A ferrocene functionalized multichromic p and n dopable donor-acceptor-donor type conjugated polymer Ozdemir, Serife; BALAN, Abidin; BARAN, Derya; Doğan, Özdemir; Toppare, Levent Kamil (Elsevier BV, 2010-10-01) Ferrocene substituted donor-acceptor-donor type polymer; poly(5,8-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-2-(naphthalen-2-yl)-3-ferrocenyl-4a,8a-dihydroquinoxaline) (PDEFNQ) was synthesized and its electrochromic properties were investigated. Cyclic voltammetry and spectroelectrochemistry studies for PDEFNQ showed that it is a multichromic green to transmissive polymer with high tendency to be both p and n doped. PDEFNQ is foreseen as a promising candidate for various applications.
The Role of Electrolyte Composition on Codeposited Ag and Cu ulu, fulya; Demici, Gokhan; ERDOĞAN, METEHAN; Karakaya, İshak (The Electrochemical Society, 2016-09-01) The eutectic Ag-Cu composition is a common brazing alloy. A complex ion bath containing KAg(CN)2, CuCN, KCN and K4P2O7 was used to codeposit Ag and Cu. The effects of KAg(CN)2, KCN and K4P2O7 concentrations on the composition and morphology of electrodeposited Ag-Cu films was investigated in this study. A constant CuCN concentration of 0.1 M was used. The increase in KCN and KAg(CN)2 concentrations caused major increases in Ag contents, but increase in K4P2O7 concentration caused a minor decrease in Ag cont...
An Electrochemical Procedure to Form Metal Powders from Recycled Hard Particle Embedded Composite Cutting Tools Altunbasak, Tansu; KUL, MEHMET; Karakaya, İshak (2017-06-01) Used valuable particle embedded composite cutting tools, obtained by powder metallurgy techniques by mixing metallic powders with hard, abrasive particles were electrolyzed for reclamation of metallic powders and valuable particles. The effects of copper ion and sulfuric acid concentrations and pH of the electrolyte, current density and temperature on microstructure of produced copper powders were investigated in detail. Copper powders were characterized by X-Ray diffraction (XRD) and scanning electron micr...

Citation Formats

G. Atakan and E. G. Günbaş, “A novel red to transmissive electrochromic polymer based on phenanthrocarbazole,” RSC ADVANCES, pp. 25620–25623, 2016, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/43322.