Chemical removal of pyritic sulfur from Beypazari liginte.

Sübaşı, Zeynep


Chemical vapor deposition of boron carbide
Karaman, Mustafa; Özbelge, Önder; Department of Chemical Engineering (2007)
Boron carbide was produced on tungsten substrate in a dual impinging-jet CVD reactor from a gas mixture of BCl3, CH4, and H2. The experimental setup was designed to minimise the effect of mass transfer on reaction kinetics, which, together with the on-line analysis of the reactor effluent by FTIR, allowed a detailed kinetic investigation possible. The phase and morphology studies of the products were made by XPS, XRD,micro hardness and SEM methods. XPS analysis showed the existence of chemical states attrib...
Chemical cleaning of water - formed deposits /
Ünlü, Burhan; Department of Chemical Engineering (1971)
Thermal distillation of in-situ oil during steam injection.
Kracan, Cevat Özgen; Department of Petroleum Engineering (1993)
Thermal analysis of a new thiophene derivative and its copolymer
Aslan, E.; Toppare, Levent Kamil; Hacaloğlu, Jale (2008-06-01)
Thermal characteristics of a new thiophene derivative, 2-(thiophen-3-yl-)ethyl octanoate (OTE), its homopolymer (POTE), and copolymer with thiophene P(OTE-co-Th) were investigated via pyrolysis mass spectrometry. Thermal degradation of the copolymer started by lose of side chains and thiophene involving products evolved almost in the same temperature range where PTh degradation was detected, at slightly higher temperatures than PTh backbone decomposed during the pyrolysis of POTE. The extent of doping and n...
Chemical vapor deposition of molybdenum disulphide on platinum foil
Karamat, S.; Hassan, Muhammad Umair; Pan, Ji Sheng; Tabassam, Lubna; Oral, Ahmet (Elsevier BV, 2020-07-01)
Transition metal dichalcogenides (TMDCs) of group -VIB (MX2, M = Mo, W; X = S, Se, Te, etc.) with sizeable bandgap exhibit different interesting physical and chemical properties which open up new avenues to their technological applications. However, refinement and expansion of growth of TMDCs are required to realize commercializable products and to bring these technological applications to consumer's market. Here, we present growth of MoS2 catalyst by ambient pressure chemical vapor deposition (CVD). A Pt f...
Citation Formats
Z. Sübaşı, “Chemical removal of pyritic sulfur from Beypazari liginte.,” Middle East Technical University, 1981.