Thermal distillation of in-situ oil during steam injection.

1993
Kracan, Cevat Özgen
Show full item record
164
views
0
downloads
https://hdl.handle.net/11511/10717
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Thermal degradation of polystyrene composites. Part I. The effect of brominated polyepoxy and antimony oxide
Kaya, Hatice; Hacaloğlu, Jale (2014-01-01)
Thermal degradation of polystyrene (PS) involving brominated polyepoxy (BA) and antimony oxide (PS/BE/Sb2O3) was studied systematically via direct pyrolysis mass spectrometry. Thermal decomposition of brominated polyepoxy was started by loss of end groups. The relative yields of high mass thermal degradation products of PS and the product distribution of brominated polyepoxy and antimony oxide were changed noticeably during the pyrolysis of PS/BE/Sb2O3 composite. Its thermal decomposition was initiated by t...
Thermal degradation of polystyrene composites. Part II. The effect of nanoclay
KAYA, Hatice; Kaynak, Cevdet; Hacaloğlu, Jale (2016-07-01)
In this work, thermal degradation behavior polystyrene/organoclay nanocomposites containing tribromophenol end-capped brominated epoxy oligomer, (BE) with or without Sb2O3 were investigated systematically via direct pyrolysis mass spectrometry. Incorporation of organically modified montmorillonite into polystyrene, (PS) matrix not only increased thermal stability but also the probability of radical recombination, disproportionation and carbonization reactions causing increase in the char yield. Exfoliation ...
Thermal hydraulic analysis of molten salt breeder reacotr Core.
El-Haj Assad, Mamdouh; Yeşin, Orhan; Department of Nuclear Engineering (1992)
Thermal catalytic hydrosilation of conjugated dienes with triethysilane in the presence of tricarbonylarenemetal complexes (metal: chromium, molybdenum, tungsten)
Rouzi, Pazilaiti; Kayran, Ceyhan; Özkar, Saim; Department of Chemistry (2000)
Thermal loading and unloading of a solid cylinder subjected to periodic internal energy cycling
Eraslan, Ahmet Nedim (2017-03-01)
An analytical model is developed to estimate partially plastic loading and unloading behavior of a transient internal energy cycling solid cylinder. The cylinder is initially at zero temperature, but for times greater than zero, heat is generated or consumed internally at a time dependent rate. The transient temperature distribution in the cylinder is obtained by using Duhamel's theorem. As the cylinder is heated or cooled slowly the uncoupled theory of thermal stress is used. Under these circumstances elas...
Citation Formats
C. Ö. Kracan, “Thermal distillation of in-situ oil during steam injection.,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr