Effect of metal surface coating on the moisture absorption characteristics of CFRP

Download
001254.pdf
1987
Şimşek, Selma
Show full item record
80
views
115
downloads
https://hdl.handle.net/11511/4517
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effect of Welding Parameters on the Liquation Cracking Behavior of High-Chromium Ni-Based Superalloy
Mashhuriazar, Amirhossein; Omidvar, Hamid; Gür, Cemil Hakan; Sajuri, Zainuddin (2020-11-01)
Gas turbine blades working under extremely harsh operating conditions are made of superalloys. These superalloys are exposed to various damage mechanisms, which wear them out gradually. Welding is often preferred to repair the damaged components for cost minimization. This study aimed to investigate the effects of flexural load, heat input, and welding speed on the weldability and intergranular liquation cracking of high-chromium Ni-based superalloy. For this purpose, a series of Sigmajig tests designed bas...
Effect of microvoids on anomalous moisture absorption of quartz/BMI composite laminates
Hurdelbrink, Keith R.; Grace, Landon R.; Güloğlu, Görkem Eğemen; Siddique, Zahed; Anderson, Jacob P.; Altan, M. Cengiz (2014-01-01)
Copyright © 2014 by ASME.The focus of this paper was to investigate the effects of microvoid content in quartz/BMI laminates on both short and long-term moisture absorption dynamics. The moisture absorption characteristics for the laminates were experimentally obtained by water immersion tests at 25°C of three-ply quartz/BMI samples that contain voids, ranging from 8.6% to 13.7% by volume. The void levels were obtained by conditioning the prepreg at different moisture levels for 48 hours in an environmental...
Effect of Polymers on the Rheological Properties of KCl Polymer Type Drilling Fluid
Kök, Mustafa Verşan (2005-05-01)
In the course of this research, the effect of two polymers (xanthan gum and polyanionic cellulose) on the rheological properties of KCl/polymer type drilling fluids was investigated. Non-Newtonian drilling fluids are conventionally characterized by rheological models (Bingham Plastic, Power Law, Casson, Herchel-Bulkley and Robertson-Stiff). In this research, forty-five KCl/polymer data sets of varying compositions are prepared. Polymer addition to the system has affected the model and caused a variation of ...
Effect of copper on the fatigue crack growth behaviour of ductile cast irons
Gönenç, Abdullah Hakan; Gürbüz, Rıza; Department of Metallurgical Engineering (1994)
Effect of ground perlite incorporation on the performance of blended cements
Erdem, T. K.; Akgül, Çağla; Tokyay, Mustafa; Erdoğan, Turhan Y. (2007-06-13)
Perlite is a volcanic rock that contains relatively high amounts of SiO2 and Al2O3. Due to its proper chemical composition and glassy structure, it can be used as a pozzolanic addition in blended cements. In this study, ground perlite was used as a cement replacement material in blended cements. Several mortar mixes were prepared to investigate the performance of those cements. The results showed that perlite incorporation caused early age strength losses when compared to the control mortars containing only...
Citation Formats
S. Şimşek, “Effect of metal surface coating on the moisture absorption characteristics of CFRP,” Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr