Improvement of flame retardance properties of unsaturated polysters

Download
015509.pdf
1991
Öztürk, Şükrü
Show full item record
48
views
0
downloads
https://hdl.handle.net/11511/4554
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Improvement of mechanical and flame retardancy properties of biocomposites based on low density polyethylene and polylactic acid
Altun, Yasemin; Bayramlı, Erdal; Doğan, Mehmet Onur; Department of Polymer Science and Technology (2015)
The main objective of this study was to improve the mechanical and flame retardant properties of low density polyethylene (LDPE) and poly (lactic acid) (PLA) based biocomposites. Wood flour (WF) and jute fabric were used as the fillers. In the mechanical property improvement studies with LDPE, the effect of two compatibilizing agents MA (random terpolymer of ethylene, acrylic ester and maleic acid) and GMA (random terpolymer of ethylene, acrylic ester and glycidyl metacrylate) functionalized polymers at dif...
Improvement of fracture resistance in a glass matrix optomechanical composite reinforced by Al2O3-ZrO2 minicomposite
Dericioğlu, Arcan Fehmi; Kagawa, Y. (null; 2002-12-31)
The possibility of obtaining fracture resistant optically transparent ceramic matrix optomechanical composites was studied on a continuous Al2O3-ZrO2 minicomposite-reinforced glass matrix model composite. A mesh-like reinforcement structure composed of unidirectional minicomposites was determined to be effective in improving the fracture resistance of the brittle matrix with a small expense in its optical transparency. With decreasing minicomposite to minicomposite spacing, the fracture resistance of the op...
Improvement of fracture resistance in a glass matrix optomechanical composite by minicomposite unit bridging
Dericioğlu, Arcan Fehmi (Elsevier BV, 2005-10-15)
Minicomposite unit bridging, which was experimentally determined to be the dominant toughening mechanism resulting in the R-curve behavior of the Al2O3-ZrO2 minicomposite-reinforced glass matrix optomechanical composite, was studied quantitatively using luminescence spectroscopy. Applied stress induced shift of the luminescence bands of the minicomposite reinforcement was calibrated. Using the experimentally obtained calibration curve, axial stresses could be mapped along the minicomposite embedded in the g...
Improvement of pea proteins’ properties by microwave glycation
Ertuğrul, Ülkü; Öztop, Halil Mecit; Şümnü, Servet Gülüm; Department of Food Engineering (2020-9)
The tendency to include plant proteins in the diet has increased significantly as consumers' preference for animal proteins decline. Sustainability goals, low manufacturing cost, and high nutritional value are also triggering this demand. For this reason, pea protein as a form of isolate and concentrate is often used in protein enriched diets due to its nutritive properties. Previously, improvement in its functional properties has been studied from many perspectives. Glycation, which is known as the i...
Improvement of impact resistance of aluminum and zinc based die cast parts by means of tool steel inserts
Kamberoğlu, Murat; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2011)
High Pressure Die Casting (HPDC) is low-cost technique for the mass production of complex, non-ferrous parts. Despite its benefits such as dimensional accuracy, surface quality and high production rate; some mechanical drawbacks limit use of HPDC in production of critical parts especially under dynamical loads. This study aims to improve impact resistance and surface hardness of die cast parts by means of tool steel inserts. These inserts act as a barrier between the impactor and die casting alloy, in order...
Citation Formats
Ş. Öztürk, “Improvement of flame retardance properties of unsaturated polysters,” Middle East Technical University, 1991.
METU IIS - Integrated Information Service open@metu.edu.tr