Characterization of Ankara meat packing plant wastewater and its treatment with a rotating biological contactor

Download
1990
Yurdakul, Mine

Suggestions

Characterization of Kızılcahamam Geothermal field by tracer testing
Kaya, Tevfik; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2005)
Kızılcahamam Geothermal Field which is 70 km far from Ankara, has been utilized for Geothermal District Heating System, 25 MWt, 2500 residences capacity, greenhouses heating, thermal facilities since 1994. The average production rate is 350m3/h during the heating season , 150m3/h during the summer season for hot water and yearly average reinjection rate is 114m3/h from the field. The long term projections has been studied concerning on expected pressure decline by matching 10 years field history data which ...
Characterization of airborne dust of return airways in oal mechanized longwall mine
Keskin, Sinan; Güyagüler, Tevfik; Department of Mining Engineering (1997)
Characterization of bainitic and martensitic microstructures in bearing steels
Yurtseven, Ece Naz; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2019)
Bainitic transformations in steels is a well-known phenomenon for more than 60 years. However, in recent years, the lower bainite in high carbon steels gained importance due to their superior mechanical properties since bainitic transformation takes place at very low temperatures, i.e. 160°C -200 °C. In this study, the morphology and mechanical properties of lower bainite are studied after applying different heat treatment procedures. The study covers SAE 52100 grade bearing steel. The specimens are austeni...
Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic barkhausen noise analysis
Bayramoğlu, Sadık; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2009)
High Pressure Torsion (HPT) is one of the most widely used severe plastic deformation methods which enable to obtain a crack free ultra-fine grained bulk material with improved mechanical properties like increased strength and toughness. In the process, a disc shaped sample is pressed between two anvils and deformed via surface friction forces by rotating one of the anvils. The aim of this study is to nondestructively characterize the variations in the deformation uniformity of the severely deformed steel d...
Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic Barkhausen noise analysis
Bayramoglu, Sadik; Gür, Cemil Hakan; Alexandrov, Igor V.; Abramova, Marina M. (2010-02-15)
High pressure torsion (HPT) is one of the most widely used severe plastic deformation methods which enable to obtain a crack-free ultra-fine grained bulk sample. In the process, a disk-shaped sample is pressed between two anvils and deformed via surface friction forces by rotating one of the anvils. The aim of this study is to nondestructively characterize the variations in the deformation uniformity of the severely deformed disks. Various sets of low carbon steel samples were obtained by applying the const...
Citation Formats
M. Yurdakul, “Characterization of Ankara meat packing plant wastewater and its treatment with a rotating biological contactor,” Middle East Technical University, 1990.