The Chemistry, Kinetics, and Potential Utilization of Different Origins of Bentonite Samples

Date

2014-01-17

Author

Kök, Mustafa Verşan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

188
views

0
downloads

In this research, different origins of bentonite samples (non-treated, treated, and test) were studied by x-ray diffraction, Fourier transform spectrophotometer, viscometer, and thermogravimetry. It was observed that the major clay minerals were smectite and montmorillonite. Different band intervals were studied by Fourier transform. The weight loss regions related to the dehydration and de-hydroxylation process were determined by thermogravimetry. Kinetic parameters of the bentonite samples were determined by Arrhenius method and it was found that the activation energies of the bentonite samples were in the range of 34.1-147 kJ/mol.

Subject Keywords

Bentonite, Clay, Kinetics, Rheology, Thermal analysis

URI

https://hdl.handle.net/11511/46358

Journal

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS

DOI

https://doi.org/10.1080/15567036.2010.532193

Collections

Department of Petroleum and Natural Gas Engineering, Article

Suggestions

OpenMETU
Core

The Thermal Characterization of Crude Oils in a Limestone Matrix of Different Particle Size Kök, Mustafa Verşan (2014-05-03) In the first part of this research, the effect of particle size (35-100 mesh) on the calcination kinetics of a limestone sample was investigated by thermogravimetric analysis technique. Thermal studies showed that two main weight loss regions are observed in limestone samples of different particle size. In the second part of the research, thermal analysis of a medium crude oil sample in a limestone matrix of different particle size is analyzed. Two different reaction regions were observed known as low tempe...
Thermal Characterization of Sepiolite Samples Kök, Mustafa Verşan (2013-01-15) In this research, two sepiolite samples of different origins were studied by X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimeter, and thermogravimetry. It was observed that both sepiolite samples are nearly pure and well crystallized sepiolite. Thermal studies (thermogravimetry) showed that four distinct weight loss regions are observed in both sepiolite samples studied. It was noticed that these structural changes play an important role to the properties and uses o...
Thermal Analysis and Rheological Study of Ocma Type Bentonite Used in Drilling Fluids Kök, Mustafa Verşan (2013-01-01) In this research, Ocma type of bentonite sample was studied by x-ray diffraction, Fourier transform spectrophotometer, viscometer, differential scanning calorimeter, and thermogravimetry. It was observed that the major clay mineral was smectite and montmorillonite. Different band intervals were studied by Fourier transform spectrophotometer. The weight loss regions related to the dehydration and de-hydroxylation process were determined by differential scanning calorimeter and thermogravimetry at different h...
The Characterization of a Tar Sand Sample Using Differential Scanning Calorimeters Senguler, I.; Kök, Mustafa Verşan (2013-01-01) In this study, non-isothermal kinetics and a thermal analysis tar sand sample is studied by differential scanning calorimeter and pressurized differential scanning calorimeter. Differential scanning calorimeter and pressurized differential scanning calorimeter curves revealed two reaction regions in the temperature range of 20-600 degrees C. Effect of pressure was also studied in order to see the thermal behavior of a tar sand sample under different elevated pressures. Two different kinetic methods (ASTM an...
The effect of lime addition on the combustion properties and sulfur contents of three different coals Ozbas, Kazim Esber; Hiçyilmaz, Cahit; Kök, Mustafa Verşan (2002-01-01) In this research, combustion characterization of 3 different coals of Turkey, from the Soma, Tuncbilek, and Afsin Elbistan regions, were investigated with thermal analysis techniques such as differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG). Lime was added to these coals in concentrations of 3, 7, and 10% by weight to investigate the change in combustible sulfur content and sulfur in ash. It was observed that lime has a positive effect on sulfur emission. Kinetic analysis was also perfor...

Citation Formats

M. V. Kök, “The Chemistry, Kinetics, and Potential Utilization of Different Origins of Bentonite Samples,” ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, pp. 173–183, 2014, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/46358.