Determination of the cement content in hardened concrete.

1965
Kurtay, Arıcan

Suggestions

Determination of bitumen content, stability values and resistance to adhesion of mineral aggregates of the bituminous mixtures.
Pekmen, Tuncer; Department of Civil Engineering (1967)
Determination of impurity profiles in silicon by anodic oxidation.
Küçükturhan, Kazım; Department of Physics (1983)
Determination of the grindability characteristics of cement clinker and trass mixture
Avşar, Çağatay; Department of Mining Engineering (1996)
Determination of fracture and fatigue behaviours of 4340 steel
Şen, Gökçe; Gürbüz, Rıza; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2015)
In this study both the characteristic and mechanical properties of received modified AISI 4340 steel -generally used in aeronautical and defense applications- has been examined. Mode I Fracture toughness (KIC) tests have been conducted with two different directional specimens of RL and LR. Fatigue crack growth behaviors of directional specimens are compared and discussed at three different positive stress ratios (R) which are 0.1, 0.3 and 0.5 under constant amplitude loading. Walker equation is used to perf...
Determination of wettability and its effect on waterflood performance in limestone medium
Karabakal, U (American Chemical Society (ACS), 2004-03-01)
Wettability measurement methods, the effect of wettability on fluid distribution, and fluid flow in porous media were discussed, and the influence of rock wettability on the relative permeability and recovery of oil by waterflooding were investigated. Experimental studies were conducted on a total of 23 core plugs from two different limestone formations. Synthetic brine (NaCl solution) and mineral oil, which has a viscosity ratio of similar to10, were used as the test fluids. Core samples, saturated with sy...
Citation Formats
A. Kurtay, “Determination of the cement content in hardened concrete.,” Middle East Technical University, 1965.