INTERPOLATED IIR MTH-BAND FILTER DESIGN WITH ALLPASS SUBFILTERS

1995-08-01
In this correspondence, we propose a new allpass-based structure for the IIR Mth- and 2Mth-band filters. These filters consist of M allpass filters and an interpolation filter(sum of two allpasses). Consequently, the proposed structure is very efficient in implementation. By choosing the allpass phase appropriately, the resulting phase response of the IIR Mth-band filter becomes approximately linear. An example is designed and compared with FIR Mth-band filters.
IEEE TRANSACTIONS ON SIGNAL PROCESSING

Suggestions

Ring based FIR-IIR best delay LS inverse filters
Aktas, M; Tuncer, Temel Engin (2004-04-30)
In this paper, we investigate the best delay LS inverse filter design problem. We propose FIR-IIR LS inverse filters to improve the LS error performance for the same complexity. Furthermore we present a new approach for the design of FIR-IIR LS inverse filters by using a special selection procedure for the IIR part. We derived the closed form LS error expressions and compared with the practical results in order to effectively show the performance improvement in this case. In general 4-5 dB improvement is ac...
Allpass variable fractional delay filters by pole loci interpolation
Hacıhabiboğlu, Hüseyin (2010-04-15)
A simple, accurate and efficient variable fractional delay (VFD) IIR filter is presented. The method is based on the interpolation of pole loci of maximally-flat allpass fractional-delay filters. The responses of the proposed VFD filter for different fractional delay values are simulated and the approximation errors are shown to be very small.
Analysis of root displacement interpolation method for tunable allpass fractional-delay filters
Hacıhabiboğlu, Hüseyin; Günel Kılıç, Banu (2007-10-01)
One of the simplest ways of designing allpass fractional-delay filters with maximally fiat group delays is by using the Thiran approximation by which the filter coefficients are calculated using a closed-form equation. However, due to the number of multiplications and divisions involved, the calculation of these coefficients is a computationally costly task and is not suitable for real-time applications. The analysis of a root-displacement-based interpolation method used in allpass tunable fractional delays...
An efficient local search method guided by gradient information for discrete coefficient FIR filter design
Çiloğlu, Tolga (2002-10-01)
A new local search method for the design of linear phase FIR filters with discrete valued coefficients is introduced in this paper. Conventional minimax criterion and normalized peak ripple magnitude (NPRM) are taken as objective functions. The principle is to search along low gradient routes with priority and to direct the search toward steeper sides as improved solutions cease to appear. The characteristics of the objective functions have been explained and used to devise the method. The method is novel i...
Design of Microstrip Quadruplet Filters on Filpro
Oruc, Sacid; Yıldırım, Nevzat (2018-11-02)
In this paper, a simple dimensional design procedure is developed for microstrip/stripline quadruplet filters by starting with direct BP synthesis of a lumped quadruplet with inverter couplings, K14, K12, K23 and K34. K14 is the cross-coupling inverter which creates a symmetric pair of finite transmission zeros (FTZ's) if the sign of K14 is opposite of the other inverters while a complex TZ is created if K14 has the same sign as the other inverters leading to linear phase (flat delay) responses. The LC reso...
Citation Formats
T. E. Tuncer, “INTERPOLATED IIR MTH-BAND FILTER DESIGN WITH ALLPASS SUBFILTERS,” IEEE TRANSACTIONS ON SIGNAL PROCESSING, pp. 1986–1990, 1995, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/47694.