Comparative Study on the Effect of Number of Girders on Live Load Distribution in Integral Abutment and Simply Supported Bridge Girders

Date

2013-06-01

Author

Yalcin, O. Fatih
Dicleli, Murat

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

182
views

0
downloads

In this study, the effect of the number of prestressed concrete girders on the distribution of live load effects among the girders of integral abutment bridges (IABs) and simply supported bridges (SSBs) is investigated. For this purpose, two and three dimensional finite element models (FEMs) of several single-span IABs and SSBs are built and analyzed. In the analyses, bridges with various superstructure properties, such as span length, girder type and size, slab thickness are considered. The finite element analyses (FEA) results are then used to calculate the live load distribution factors (LLDFs) for the girders of IABs and SSBs as a function of the number of girders. Comparison of the analyses results revealed that, LLDFs for SSBs vary slightly as the number of girders changes. However, in the case of IABs, it is found that while the LLDFs for the girder moments decrease significantly as the number of girders increases, the number of girders has a negligible effect on the LLDFs for the girder shear. Accordingly, the number of girders is added as a new parameter to the previously developed correction factors for AASHTO LRFD LLDFs for the girder moment. It is observed that the developed formulae yield a reasonably good estimate of live load effects in prestressed concrete IAB girders.

Subject Keywords

Civil and Structural Engineering, Building and Construction

URI

https://hdl.handle.net/11511/49289

Journal

ADVANCES IN STRUCTURAL ENGINEERING

DOI

https://doi.org/10.1260/1369-4332.16.6.1011

Collections

Department of Engineering Sciences, Article

Suggestions

OpenMETU
Core

Live Load Distribution Formulas for Single-Span Prestressed Concrete Integral Abutment Bridge Girders Dicleli, Murat (American Society of Civil Engineers (ASCE), 2009-11-01) In this study, live load distribution formulas for the girders of single-span integral abutment bridges (IABs) are developed. For this purpose, two and three dimensional finite-element models (FEMs) of several IABs are built and analyzed. In the analyses, the effects of various superstructure properties such as span length, number of design lanes, prestressed concrete girder size, and spacing as well as slab thickness are considered. The results from the analyses of two and three dimensional FEMs are then u...
Experimental Determination of Resistance Characteristics of Support Details Used in Prestressed Concrete Bridge Girders Baran, Eray; French, Catherine; Schultz, Arturo (American Society of Civil Engineers (ASCE), 2009-09-01) Static load tests were performed on support details used at the ends of prestressed concrete pedestrian bridge girders to determine the resistance characteristics of girder supports in the direction perpendicular to the longitudinal axis of the girders. The specimens tested represent support details that have also been widely used in prestressed concrete highway bridges in Minnesota and in other states. Two specimens, one representing the free-end detail and one representing the restrained-end detail were s...
Analytical prediction of thermal displacement capacity of integral bridges built on sand Dicleli, Murat (SAGE Publications, 2005-02-01) In this research, analytical equations are developed to calculate the lateral displacement capacity and maximum length limits of integral bridges built on sand based on the low-cycle fatigue performance of the piles under cyclic thermal variations and the ultimate strength of the abutment under positive thermal variations. To formulate the displacement capacity and maximum length limits of integral bridges based on the low cycle fatigue performance of steel H-piles under cyclic thermal variations, first, H-...
Investigation of the Applicability of AASHTO LRFD Live Load Distribution equations for Integral Bridge Substructures Erhan, Semih; Dicleli, Murat (SAGE Publications, 2009-08-01) In this study, applicability of the AASHTO LRFD girder live load distribution equations (LLDEs) for integral bridge (IB) abutments and piles is investigated. For this Purpose, numerous 3-D and corresponding 2-D structural models of typical IBs are built and analyzed under AASHTO LRFD live load. In the analyses, the effect of various superstructure properties such as span length, slab thickness, girder spacing and stiffness are considered. The results from the 2-D and 3-D analyses are then used to calculate ...
Efficiency of Seismic Isolation for Seismic Retrofitting of Heavy Substructured Bridges Dicleli, Murat; Constantinou, Michael C. (American Society of Civil Engineers (ASCE), 2005-07-01) In this paper, the efficiency of seismic isolation for seismic retrofitting of bridges with light superstructures and heavy substructures in the state of Illinois is studied. For this purpose, a representative bridge was selected by Illinois Department of Transportation. A detailed structural model of the bridge capable of simulating the nonlinear behavior of its components and soil-bridge interaction effects was first constructed. Iterative multimode response spectrum analysis (IMMRSA) of the bridge were c...

Citation Formats

O. F. Yalcin and M. Dicleli, “Comparative Study on the Effect of Number of Girders on Live Load Distribution in Integral Abutment and Simply Supported Bridge Girders,” ADVANCES IN STRUCTURAL ENGINEERING, pp. 1011–1034, 2013, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/49289.