Çok ince soğurucu katmanlı -Eta-güneş gözelerinin üretimi ve incelenmesi

Download

TVRRek5EUTA.pdf

Date

2015

Author

Güllü, Hüseyin Hasan
Parlak, Mehmet
Hosseını, Arezoo
Erçelebi, Ayşe Çiğdem

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

199
views

91
downloads

Bu çalışmada, çok ince soğurucu güneş gözeleri uygulamalarında alt tabaka olan ve yüksek gözenekli ve nanoparçacıklı yapıya sahip TiO2 katmanlarının üretimi için farklı TiO2 solüsyonları hazırnlanmıştır. Piyasada yaygın bulunan TiO2 kaynağı ve döndürmeli kaplama (yada saçtırmalı kaplama) tekniği kullanılarak, ITO kaplı cam alttaşlar üzerine nano gözenekli TiO2 katmanları üretilmiştir. İnce soğurucu tabaka olarak kullanılan yüksek gözenekli ve nano kristal yapısındaki TiO2 üzerine saçtırma tekniği kullanılarak II-VI grubuna ait malzemelerin büyütülmesi incelenmiştir. Bu çalışmada, çok ince soğurucu tabaka olarak, yüksek dirençli CdTe ince filmleri incelenmiştir. Aygıt yapısını tamamlamak için, TCO kaplı cam/TiO2/CdTe üzerine geniş bant aralığına sahip p-tipi yarıiletken olan ZnTe (ZnSnTe) kullanılmıştır. Bu çalışmanın başlıca amacı, ETA güneş gözeleri kullanımına uygun olan her bir yarıiletken tabakanın ve yeni jenerasyon güneş gözeleri uygulamalarının bir örneği olan ETA güneş gözelerinin laboratuvar ölçekli üretim basamaklarının araştırılmasıdır.

URI

https://app.trdizin.gov.tr/publication/project/detail/TVRRek5EUTA
https://hdl.handle.net/11511/49733

Collections

Department of Physics, Project and Design

Suggestions

OpenMETU
Core

Fabrication and investigation of extremely thin CdTe absorber layer solar cells Hosseini, Arezoo; Erçelebi, Ayşe Çiğdem; Turan, Raşit; Department of Physics (2016) Extremely thin absorber layer (ETA) solar cells aim to combine the advantages of using very thin and cheaply produced absorber layer on nano structured substrates with stability of all-solid-state solar cells. This type of photovoltaic devices use a nano structured interpenetrating heterojunction of thin light-absorbing layer at the interface between an n- and p-type semiconductors. N-type nano structured TiO2 layer is deposited on a Transparent Conducting Oxide coated glass (TCO) substrate, following with ...
Design and modeling of a novel rectifier with ceramic hollow fiber membrane contactor for miniaturized absorption cooling devices Özkan, Onur; Güvenç Yazıcıoğlu, Almıla; Baker, Derek Keıth; Department of Mechanical Engineering (2015) Miniaturized and mobile absorption cooling devices may be used in many applications, but effective and small size heat and mass exchangers are required. Ceramic hollow fiber membranes are thermally stable so that they can be used for the rectification of ammonia in an absorption cooling device. In this study the simultaneous heat and mass transfer between the ammonia-water vapor and the reflux liquid is modeled in a rectifier and stripper with hydrophobic ceramic hollow fiber membranes. A similar model is u...
The effects of post-annealing process on the physical properties of silver-indium-selenium ternary semiconductor thin films deposited by electron beam technique Çolakoğlu, Tahir; Parlak, Mehmet; Department of Physics (2009) Ternary chalcopyrite compounds are the semiconductors with suitable properties to be used as absorber materials in thin film solar cells. AgInSe2 is a promising candidate with its several advantages over the widely used CuInSe2. The purpose of this study was to optimize the physical properties of the Ag-In-Se (AIS) thin films that were deposited by e-beam evaporation of Ag3In5Se9 single crystal powder for solar cell applications by means of post-annealing process under nitrogen atmosphere. The as-grown AIS ...
Non-destructive evaluation of residual stresses in the multi-pass steel weldments Erian, Gökhan; Gür, Cemil Hakan; Batıgün, Caner; Department of Metallurgical and Materials Engineering (2012) The purpose of this thesis is non-destructive determination of residual stress state in the multi-pass welded steel plates by Magnetic Barkhausen Noise (MBN) technique. To control the effectiveness of the developed procedure, continuous MBN measurements on the heat affected zone and parent metal of the welded plates were performed. In the experimental part, various steel plates were welded with different number of weld passes. Various series of samples were prepared for residual stress and for angular defle...
Synthesis of colloidal silver particles with different sizes by seeding approach for surface enhanced raman scattering (sers) studies Sancı, Rukiye; Volkan, Mürvet; Department of Chemistry (2009) In this study, silver nanorods and nanospheroids were prepared both in aqueous solution and on the surface of glass slides through seed-mediated growth approach at room temperature and used as a surface enhanced Raman scattering (SERS) substrate. The synthesis of metallic nanorods was started with the production of silver nanospheres as seed utilizing sodium borohydride and trisodium citrate as reducing and capping agents, respectively. These seeds were then added to a growth solution containing additional ...

Citation Formats

H. H. Güllü, M. Parlak, A. Hosseını, and A. Ç. Erçelebi, “Çok ince soğurucu katmanlı -Eta-güneş gözelerinin üretimi ve incelenmesi,” 2015. Accessed: 00, 2020. [Online]. Available: https://app.trdizin.gov.tr/publication/project/detail/TVRRek5EUTA.