Effect of Boron-Containing Materials on the Flammability and Thermal Degradation of Polyamide 6 Composites Containing Melamine

2010-12-05
Dogan, Mehmet
Bayramlı, Erdal

Suggestions

Effect of Gas Permeation Temperature and Annealing Procedure on the Performance of Binary and Ternary Mixed Matrix Membranes of Polyethersulfone, SAPO-34, and 2-Hydroxy 5-Methyl Aniline
Oral, Edibe Eda; Yılmaz, Levent; Kalıpçılar, Halil (Wiley, 2014-09-05)
This study investigated the effect of annealing time and temperature on gas separation performance of mixed matrix membranes (MMMs) prepared from polyethersulfone (PES), SAPO-34, and 2-hydroxy 5-methyl aniline (HMA). A postannealing period at 120 degrees C for a week extensively increased the reproducibility and stability of MMMs, but for pure PES membranes no postannealing was necessary for stable and reproducible performance. The effect of operation temperature was also investigated. The permeabilities of...
Effect of the surface roughness and construction material on wall slip in the flow of concentrated suspensions
Gulmus, Sergul Acikalin; Yılmazer, Ülkü (Wiley, 2007-03-05)
Recent studies on polyethylene, elastomers, and thermoplastics have revealed that the construction material and surface roughness are two important factors affecting wall slip. In this study, to determine the true rheological behavior of model concentrated suspensions, a multiple-gap separation method was used in a parallel disk rheometer. The model suspensions studied were poly (methyl methacrylate) particles with an average particle size of 121.2 mu m in hydroxyl-terminated polybutadiene. The aim of this ...
Effect of composite preparation techniques on electrical and mechanical properties and morphology of nylon 6 based conductive polymer composites
Koysuren, Ozcan; Yesil, Sertan; Bayram, Göknur (Wiley, 2006-11-05)
Nylon 6/carbon black conductive composites were prepared using two different methods, masterbatch dilution and melt mixing. Their effect on the size and distribution of carbon black agglomerates in the matrix was studied in terms of electrical and mechanical properties and morphology. The electrical resistivity of composites prepared by both methods decreased with increasing filler composition. The electrical resistivity of the diluted masterbatch composites and the melt mixed composites was reduced from th...
Effect of fillers on thermal and mechanical properties of polyurethane elastomer
Benli, S; Yilmazer, U; Pekel, F; Özkar, Saim (Wiley, 1998-05-16)
The effects of five different types of fillers on the thermal and mechanical properties of hydroxyl-terminated polybutadiene-based polyurethane elastomers were explored to develop a filled polyurethane elastomeric Liner for rocket motors with hydroxyl-terminated polybutadiene-based composite propellants. Two types of carbon black, silica, aluminum oxide, and zirconium(III)oxide were used as filler. Based on the improvement in the tensile properties and the erosion resistance achieved in the first part of th...
Effect of Microfiber Reinforcement on the Morphology, Electrical, and Mechanical Properties of the Polyethylene/Poly(ethylene terephthalate)/Carbon Nanotube Composites
Yesil, Sertan; Koysuren, Ozcan; Bayram, Göknur (Wiley, 2010-11-01)
In situ microfiber reinforced conductive polymer composites consisting of high-density polyethylene (HDPE), poly(ethylene terephthalate) (PET), and multiwalled carbon nanotube (CNT) were prepared in a twin screw extruder followed by hot stretching of PET/CNT phase in HDPE matrix. For comparison purposes, the HDPE/PET blends and HDPE/PET/CNT composites were also produced without hot stretching. Extrusion process parameters, hot-stretching speed, and CNT amount in the composites were kept constant during the ...
Citation Formats
M. Dogan and E. Bayramlı, “Effect of Boron-Containing Materials on the Flammability and Thermal Degradation of Polyamide 6 Composites Containing Melamine,” JOURNAL OF APPLIED POLYMER SCIENCE, pp. 2722–2727, 2010, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/52448.