Stability and control of a power system using inverse nyquist array design technique.

1973
Elmaslı, İsmail Atilla

Suggestions

STABILITY OF CONTROL FORCES IN REDUNDANT MULTIBODY SYSTEMS
IDER, SK (1996-01-03)
In this paper inverse dynamics of redundant multibody systems using a minimum number of control forces is formulated. It is shown that the control forces and the task accelerations may become noncausal at certain configurations, yielding the dynamical equation set of the system to be singular. For a given set of tasks, each different set of actuators leads to a different system motion and also to different singular configurations. To avoid the singularities in the numerical solution, the dynamical equations...
Stability and transparency improvement in haptic device employing both MR-brake and active actuator
Baser, Ozgur; Konukseven, Erhan İlhan; Gurocak, Hakan (2012-12-14)
An ideal haptic device should transmit a wide range of stable virtual model impedances (Z-width) with high transparency. Magneto-rheological fluid (MR) brakes are advantageous in haptic devices since they are passive actuators. However, they cannot provide high transparency and smooth interaction due to high viscous friction, residual torque, slow response, sticking and hysteresis effects. On the other hand, active actuators cannot simulate high virtual impedances stably, but provide high transparency with ...
Stability of single-bay portal frames on elastic supports.
Bilgili, Hasan; Department of Civil Engineering (1965)
Stability of small-scale generators in parallel with interconnected system
Ayözcan, Mehmet Sait; Özay, Nevzat; Department of Electrical and Electronics Engineering (1991)
Stability of random beam-column subjected to stochastic excitation.
Üztüğ, Halil Emin; Department of Mechanical Engineering (1974)
Citation Formats
İ. A. Elmaslı, “Stability and control of a power system using inverse nyquist array design technique.,” Middle East Technical University, 1973.