Effect of Film Deposition Conditions on the Properties of Multilayer Films of a Dual Responsive Block Copolymer Micelle



Effect of Synthesis Conditions on the Structure and Catalytic Performance of V- and Ce-Incorporated SBA-15-like Materials in Propane Selective Oxidation
Aktas, Ozge; YAŞYERLİ, SENA; DOĞU, GÜLŞEN; Doğu, Timur (2010-08-04)
Vanadia- and/or ceria-incorporated SBA-15-like materials were prepared by impregnation and one-pot hydrothermal synthesis procedures at different solution pH values. The pH of the synthesis solution was found to have a very strong effect on the pore structure, chemical composition, and morphology of the synthesized materials. Materials synthesized by impregnation of V and/or Ce and by the one-pot hydrothermal route at pH << 1.0 showed the characteristic ordered pore structure of SBA-15. However, the materia...
Effect of Osteogenic Growth of Adipose Derived Stem Cells And Human Osteoblasts on the Mechanical Properties of Protein Based Films with Microchannels
Sayın, Esen; Rashid, R H; Elsheikh, Ahmed; Rodriguez Cabello, J C; Baran, Erkan Türker; Hasırcı, Vasıf Nejat (2015-08-30)
Effect of High-Density Nanoparticles on Recrystallization and Texture Evolution in Ferritic Alloys
Aydoğan Güngör, Eda; Carvajal-Nunez, Ursula; Vogel, Sven C.; Li, Meimei; Maloy, Stuart A. (MDPI AG, 2019-03-01)
Ferritic alloys are important for nuclear reactor applications due to their microstructural stability, corrosion resistance, and favorable mechanical properties. Nanostructured ferritic alloys having a high density of Y-Ti-O rich nano-oxides (NOs < 5 nm) are found to be extremely stable at high temperatures up to similar to 1100 degrees C. This study serves to understand the effect of a high density of nano-particles on texture evolution and recrystallization mechanisms in ferritic alloys of 14YWT (14Cr-3W-...
Effect of self-ion irradiation on the microstructural changes of alloy EK-181 in annealed and severely deformed conditions
Aydoğan Güngör, Eda; Gigax, J. G.; Chen, D.; Wang, X.; Dzhumaev, P. S.; Emelyanova, O. V.; Ganchenkova, M. G.; Kalin, B. A.; Leontiva-Smirnova, M.; Valiev, R. Z.; Enikeev, N. A.; Abramova, M. M.; Wu, Y.; Lo, W. V.; Yang, Y.; Short, M.; Maloy, S. A.; Garner, F. A.; Shao, L. (Elsevier BV, 2017-04-01)
EK-181 is a low-activation ferriticimartensitic steel that is an attractive candidate for in-core component materials for both fast reactors and fusion reactors. To assess the effect of microstructural engineering on radiation response, two variants of EK-181 were studied: one in an annealed condition and the other subject to severe plastic deformation. These specimens were irradiated with 3.5 MeV Fe self-ions up to 400 peak displacements per atom (dpa) at temperatures ranging from 400 degrees C to 500 degr...
Effect of fabrication and process parameters on the morphology and performance of a PAN-based zeolite-filled pervaporation membrane
Okumus, E; Gurkan, T; Yılmaz, Levent (Elsevier BV, 2003-09-15)
The aim of this study is to develop a novel pervaporation membrane for dehydration of azeotropic ethanol-water mixture and to investigate the effect of membrane preparation and process parameters on the membrane performance. Zeolites (3A, 4A and 13X) are added as fillers to the base polymer poly [acrylonitrile] (PAN). It is observed that the volatility of the casting solvent and the annealing temperature strongly affect the performance and morphology of the manufactured membranes. Scanning electron microgra...
Citation Formats
D. Gündoğdu and İ. Erel Göktepe, “Effect of Film Deposition Conditions on the Properties of Multilayer Films of a Dual Responsive Block Copolymer Micelle,” 2017, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/53641.