EFFECT OF CENTRIFUGATION ON THE REMOVAL OF EXTRACELLULAR POLYMERS AND PHYSICAL-PROPERTIES OF ACTIVATED-SLUDGE

1994-01-01
Activated sludge is a flocculated suspension of living and dead microorganisms enmeshed together in a polymer matrix along with some organic and inorganic materials. Extracellular polymers, main components of which are the polysaccharides, proteins, and nucleic acids, act as a protective barrier to the living microbial community, and give the flee its integrity and rigidity. These polymers have been found to affect the dewatering and settling characteristics of activated sludge. Even though they were studied considerably in the past there is not a complete understanding of the relationship between the amount of polymer and changes in the physical properties of sludge. The purpose of this research is to observe the effects of centrifugal force on the extraction of the extracellular polymers from an activated sludge and to correlate the amount of polymer extracted to the subsequent physical properties of the sludge. Centrifugal forces of 2000, 5000, 8000, 11,000, 14,000, and 16,500 G were tested for their effects on the amount of extracellular polymer collected, as well as the final properties of sludge like viscosity, filterability, compactability and supernatant turbidity. Results were evaluated in comparison to those of an uncentrifuged control waste activated sludge. Removal of extracellular polymers seems to affect the viscosity of activated sludge. Filterability, as measured by the capillary suction time instrument, was affected by the extraction of polymers to a great degree. Results of the independent tests correlated well with each other and with the amount of polymers extracted. Results of this study have important implications on sludge pumping and dewatering.
WATER SCIENCE AND TECHNOLOGY

Suggestions

Effect of EDTA on activated sludge properties
Sanin, Faika Dilek (2001-02-01)
Bacterial extracellular polymers have been found to be important in bioflocculation of activated sludge. In this study ethylene diamine tetra acetic acid (EDTA) method of extracting bacterial extracellular polymers is examined. Following extractions, it is observed that EDTA extracted significant amounts of biopolymers. However, the chemical treatment causes serious changes in sludge properties. Sludge particle size is reduced from 21 mum to 14.6 mum, filtration properties of sludge deteriorates, indicated ...
Effect of Pd loading in Pd-Pt bimetallic catalysts doped into hollow core mesoporous shell carbon on performance of proton exchange membrane fuel cells
Ficicilar, Berker; BAYRAKÇEKEN YURTCAN, Ayşe; Eroğlu, İnci (2009-08-01)
A significantly active Pd-Pt/carbon electrocatalyst for polymer electrolyte membrane fuel cells was synthesized by microwave irradiation using a hollow core mesoporous shell (HCMS) carbon as catalyst support that was prepared by template replication of core/shell spherical silica particles and two different carbon precursors. Pt/Pd percent weight ratios on carbon support were varied as 20/0, 15/5, 10/10, 5/15 to 0/20. As the average pore diameter of the carbon support was increased from 3.02 nm to 3.90 nm b...
Effect of rigid rod molecular structures on the properties of regenerated and virgin poly(ethylene terephtalate)
Duru, C. Zeynep; Bayramlı, Erdal; Department of Polymer Science and Technology (2004)
In recent years,the recycling of plastic waste incerased worldwide.The basic impetus for this increase is the public awereness regarding polltuion of the environment.Many different types of recycling processes are being used to reduce the use of raw materials and to reduce energy consumption.PET recycling is one of the most important recycling processes.addition of thermotropic liquid crystalline polymers has also become wide-spread in recent years to increase their mechanical properties and other selected ...
Effect of carbon to nitrogen ratio on the physical and chemical properties of activated sludge
Durmaz, B; Sanin, Faika Dilek (2003-11-01)
The effect of carbon to nitrogen ratio (C/N) of the feed on the physical and surface chemical properties of activated sludge is investigated. Semi-continuous reactors with 2 liters volume were operated at a mean cell residence time of 8 days. These mixed culture reactors were operated at 3 different carbon to nitrogen ratio. The operation of conventional activated sludge plants treating municipal wastewater is represented with reactors having a C/N ratio of 21 (in terms of the ratio of COD to TKN). Carbon a...
Effect of Conjugated Core Building Block Dibenzo[a,c]phenazine Unit on pi-Conjugated Electrochromic Polymers: Red-Shifted Absorption
Unver, Elif Kose; Tarkuc, Simge; Udum, Yasemin Arslan; Tanyeli, Cihangir; Toppare, Levent Kamil (2010-04-15)
A comparative investigation was undertaken for the electrosynthesis and electrochemical properties of three different electroactive polymers having a conjugated core building block, dibenzo[a,c]phenazine. A series of monomers has been synthesized as regards to thiophene based units; thiophene, 3-hexyl thiophene, and 3,4-ethylenedioxythiophene. The effects of different donor substituents on the polymers' electrochemical properties were examined by cyclic voltammetry. Introducing highly electron-donating (eth...
Citation Formats
F. D. Sanin, “EFFECT OF CENTRIFUGATION ON THE REMOVAL OF EXTRACELLULAR POLYMERS AND PHYSICAL-PROPERTIES OF ACTIVATED-SLUDGE,” WATER SCIENCE AND TECHNOLOGY, pp. 117–127, 1994, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/55047.