Crack propagation in fatigue test specimens containing circular hole.

Date

1985

Author

Hazneder, Faik

Metadata

Show full item record

Item Usage Stats

URI

https://hdl.handle.net/11511/5579

Collections

Suggestions

Crack propagation in fatigue specimens containing elliptical hole. Deveci, Recep; Department of Mechanical Engineering (1985)
Crack propagation in notched fatigue test speciments. Karadeniz, C. Celalettin; Department of Mechanical Engineering (1979)
Crack propagation modeling in rocks and its application to indentation problems Fatehi Marji, Mohammad; Tutluoğlu, Levent; Department of Mining Engineering (1990)
CRACK-GROWTH KINETICS OF 7050-T73651 ALUMINUM-ALLOY UNDER CONSTANT LOAD AT 150-DEGREES-C SARIOGLU, F; ABACHI, P; DORUK, M (Springer Science and Business Media LLC, 1993-03-15) Crack growth tests at 150-degrees-C under constant load conditions were performed on compact tension specimens of 7050-T73651 aluminium alloy. The d.c. potential drop method was employed to monitor crack lengths throughout the tests. Fracture mechanics parameters such as the stress intensity factor (K) and energy-rate line integral (C*) were used to establish correlation with the crack propagation rates. As a result of experiments it was found that crack growth rates (da/dt) versus K, over discrete ranges o...
Crack problems in a functionally graded layer under thermal stresses Dağ, Serkan; Yahşi, O. Selçuk; Department of Mechanical Engineering (1997)

Citation Formats

F. Hazneder, “Crack propagation in fatigue test specimens containing circular hole.,” Middle East Technical University, 1985.