Synthesis and characterization of hydrothermally grown potassium titanate nanowires

Date

2015-06-01

Author

KAPUSUZ, Derya
Kalay, Yunus Eren
Park, Jongee
Öztürk, Abdullah

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

188
views

0
downloads

Potassium titanate (KT) nanowires were synthesized by a one-step hydrothermal reaction between TiO2 and aqueous KOH solution. The effects of KOH concentration and reaction time on hydrothermal formation and KT nanowire growth were investigated. The nanowire growth mechanism was elucidated using a combined study of powder X-ray diffraction, and scanning and transmission electron microscopy. The results revealed that hydrothermal growth was initiated by the formation of amorphous-like Ti-O-K sheets in anatase. Increasing hydrothermal reaction time caused the transformation of anatase to Ti-O-K sheets, from which potassium hexa-titanate (K2Ti6O13) nuclei formed and grew to establish one-dimensional morphology through preferential growth along the b-axis. It was revealed that the hydrothermal reactions followed a quite different mechanism than the well-known calcination route. Potassium tetra-titanate (K2Ti4O9) crystals formed in the amorphous region using the hexa-titanate phase as a nucleation site for heterogeneous crystallization. Increasing the KOH concentration in the solution accelerated the hydrothermal reaction rate.

Subject Keywords

Potassium titanate, Hydrothermal, High-resolution transmittance electron microscopy (HRTEM)

URI

https://hdl.handle.net/11511/55948

Journal

JOURNAL OF CERAMIC PROCESSING RESEARCH

Collections

Department of Metallurgical and Materials Engineering, Article

Suggestions

OpenMETU
Core

Synthesis and characterization of conducting graft copolymers based on oligophenols Sahmetlioglu, Ertugrul; Arikan, Ufuk; Toppare, Levent Kamil; Yuruk, Huseyin; Mart, Hasan (Informa UK Limited, 2006-10-01) Oligo-2-aminophenol (OAF) was synthesized with oxidative polycondensation of 2-aminophenol and hydrogen peroxide in an aqueous alkaline medium at 80 degrees C. Oligo-2-aminophenol with thiophene side groups (TOAF) was obtained by the reaction of OAF and thiophene-3-acetic acid. Graft copolymers of TOAF and pyrrole were synthesized by electrochemical polymerization in p-toluene sulfonic acid (PTSA)/water medium. Characterization of the graft copolymer (TOAF-g-Py), was carried out by combination of techniques...
Synthesis and characterization of thiophen-3-yl-acetic acid 4-pyrrol-1-yl-phenyl ester and its conducting polymers Bingöl, Bahar; Toppare, Levent Kamil; Department of Chemistry (2003) Thiophen-3-yl acetic acid 4-pyrrol-1-yl phenyl ester (TAPE) monomer was synthesized by the reaction of thiophene acetic acid with thionyl chloride, and further reaction of thiophen-3-yl-acetyl chloride with 4-pyrrol-1-yl phenol. Electrochemical behavior of this monomer (TAPE) was determined by cyclic voltammetry. Homopolymers were achieved both by using electrochemical and chemical polymerization techniques. Copolymers of TAPE in the presence of bithiophene and pyrrole were synthesized by potentiostatic ele...
Synthesis and characterization of polycaprolactone-based segmented polyurethanes Guney, Aysun; Kızıltay, Aysel; Hasırcı, Nesrin; Endoğan Tanır, Tuğba (2019-01-01) Segmented polyurethanes were synthesized by the reactions of poly(epsilon-caprolactone) (PCL)-diol and 1,6-hexamethylene diisocyanate through bulk polymerization without using solvent, initiator, or catalyst. Phase separation and hydrogen bond formation between hard segments or between hard and soft segments were examined by Fourier transform infrared spectroscopy (FTIR)-ATR and X-ray diffraction (XRD), while physical and mechanical properties were studied by atomic force microscope, differential scanning c...
Synthesis and characterization of a new soluble conducting polymer and its electrochromic devices Sahin, Elif; Sahmetlioglu, Ertugrul; Akhmedov, Idris M.; Tanyeli, Cihangir; Toppare, Levent Kamil (Elsevier BV, 2006-10-01) A new polythiophene derivative was synthesized by both chemical and electrochemical oxidative polymerization of 1-(perfluorophenyl)-2,5-di(2-thienyl)-1H-pyrrole (FPTPy). The structures of both the monomer and the soluble polymer were elucidated by nuclear magnetic resonance (H-1-NMR) and fourier transform infrared (FTIR). Polymer of FPTPy was also synthesized via potentiostatic electrochemical polymerization in acetonitrile (AN)/NaClO4/LiClO4 (0.1 M:0.1 M) Solvent-electrolyte couple. Characterizations of th...
Synthesis and characterization of conducting copolymers of succinic acid bis-(4-pyrrol-1-yl-phenyl) ester and their electrochromic properties Ertas, M; Çırpan, Ali; Toppare, Levent Kamil (Elsevier BV, 2004-05-07) A new dipyrrolyl monomer was synthesized via the reaction between 4-pyrrol-1-yl phenol and butanedioyl dichloride. Electrochemical behavior of this monomer, succinic acid bis-(4-pyrrol-1-yl-phenyl) ester (SM) was studied. Homopolymerization was achieved by chemical and constant Current electrolysis methods. Copolymerization of SM with thiophene was performed by constant potential electrolysis in acetonitrile (AN)-tetrabutylammonium tetrafluoroborate (TBAFB) and dichloromethane (DCM)-TBAFB, solvent-electroly...

Citation Formats

D. KAPUSUZ, Y. E. Kalay, J. Park, and A. Öztürk, “Synthesis and characterization of hydrothermally grown potassium titanate nanowires,” JOURNAL OF CERAMIC PROCESSING RESEARCH, pp. 291–297, 2015, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/55948.