Effects of compression ratio and the ratio of methanol to gasoline in blend on the exhaust gas emissions of a spark-ignition engine.

1987
Civil, Turan
Show full item record
96
views
0
downloads
https://hdl.handle.net/11511/5650
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effects of mix composition and water-cement ratio on the sulfate resistance of blended cements
Sahmaran, M.; Kasap, O.; Duru, K.; Yaman, İsmail Özgür (2007-03-01)
This paper presents an experimental investigation on the sulfate resistance of blended cements containing various amounts of natural pozzolan and/or Class-F fly ash. The performance of blended cements was monitored by exposing the prepared mortar specimens to a 5% Na2SO4 Solution for 78 weeks. For comparison, an ordinary Portland cement (produced with the same clinker as blended cements) and it sulfate resistant Portland cement (produced from a different clinker) were also used. In addition to the cement ch...
Effects of high hydrostatic pressure (HHP) on quality parameters and shelf-life of lager beer
Buzrul, Sencer; Alpas, Hami; Bozoğlu, Faruk; Department of Food Engineering (2003)
Filtered bright and unfiltered hazy lager beer samples were either treated with high hydrostatic pressure (200, 250, 300, 350 MPa for 3, 5 and 10 min at 10°C and 20°C) or conventional heat pasteurization (60°C for 15 min). Treatments did not affect ethanol, extract, fermentation degree, density and pH in comparison with untreated beers. Both treatments produced microbiologically stable products. Bitterness, color, protein sensitivity and chill haze parameters were affected by both the HHP and heat treatment...
Effects of camberwise varying tip injection on loss and wake characteristics of a low pressure turbine blade
Mercan, Bayram; Dogan, Eda; Ostovan, Yashar; Uzol, Oğuz (2015-08-01)
This paper presents the results of an experimental study that investigates the effects of camberwise varying tip injection on the total pressure loss and wake flow characteristics downstream of a row of Low Pressure Turbine (LPT) blades. This injection technique involves spanwise jets at the tip that are issued from a series of holes distributed along the camber line. The injection from each hole is individually and separately controlled using a computer driven solenoid valve and therefore the flow injectio...
Effects of specimen height and loading span on the fracture toughness of disc type rock specimens under three point bending
Tez, Yaşar Burkay; Tutluoğlu, Levent; Department of Mining Engineering (2008)
A relatively new fracture toughness testing method called Straight Notched Disc Bending (SNDB) was used before for fracture testing of Ankara Andesite and Afyon Marble cores. In this work to investigate the applicability of the new method to other rock types. With a preliminary notch of 10 mm, straight notched disc type specimens with a diameter of 75 mm were loaded by three-point bending loads. Investigation of effect of specimen height on the stress intensity factor and fracture toughness was carried out....
Effects of size and number of perforations on water vapor permeability of polyethylene film.
Özden, Hatice Özlem; Esin, Ali; Bayındırlı, Alev; Department of Food Engineering (2002)
Citation Formats
T. Civil, “Effects of compression ratio and the ratio of methanol to gasoline in blend on the exhaust gas emissions of a spark-ignition engine.,” Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr