Ethylene-methyl acrylate-glycidyl methacrylate toughened poly(lactic acid) nanocomposites

Date

2013-06-05

Author

Baouz, Touffik
Rezgui, Farouk
Yılmazer, Ülkü

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

180
views

0
downloads

Poly (lactic acid) (PLA) was melt blended in a twin screw extruder using an ethylene-methyl acrylate-glycidyl methacrylate rubber as a toughener. PLA/rubber blends were immiscible as observed by scanning electron microscopy. Impact strength and ductility of PLA were improved by the addition of the rubber at the expense of strength and stiffness. An organo-montmorillonite (OMMT) was used at 2 wt % to counteract the negative effect of the rubber on modulus, and balanced properties were observed at 10 wt % rubber content. X-ray diffraction and transmission electron microscopy revealed the formation of intercalated/exfoliated structure in the ternary nanocomposites. Thermal behavior analysis indicated that the degree of crystallinity is slightly affected by the clay and the rubber. Both the clay and the rubber decreased the crystallization temperature of PLA and acted as nucleating agents for PLA. The viscosity of the mixtures as measured by melt flow index was highly influenced by the rubber and the OMMT. (c) 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

Subject Keywords

Glycidyl methacrylate, Rubber toughening, Organoclay, Nanocomposite, Poly(lactic acid)

URI

https://hdl.handle.net/11511/56932

Journal

JOURNAL OF APPLIED POLYMER SCIENCE

DOI

https://doi.org/10.1002/app.38529

Collections

Graduate School of Natural and Applied Sciences, Article

Suggestions

OpenMETU
Core

Rheological properties of poly(lactic acid) based nanocomposites: Effects of different organoclay modifiers and compatibilizers Acik, Eda; Orbey, Nese; Yılmazer, Ülkü (2016-01-20) Poly(lactic acid) (PLA) nanocomposites containing five types of organically modified, layered silicates and two elastomeric compatibilizers, namely ethylene-glycidyl methacrylate (E-GMA) and ethylene-butyl acrylate-maleic anhydride (E-BA-MAH), were prepared using a twin screw extruder. The morphologies of the nanocomposites were determined by X-ray diffraction (XRD) and transmission electron microscopy (TEM), and the rheological properties of the melts were measured using small-amplitude oscillatory shear. ...
Propylene Epoxidation: High-Throughput Screening of Supported Metal Catalysts Combinatorially Prepared by Rapid Sol-Gel Method Önal, Işık; Seubsai, Anusorn; Kahn, Michael; ŞEKER, EROL; Senkan, Selim (2010-02-01) The gas phase oxidation of propylene using molecular oxygen was studied on a variety of supported metal catalysts. The most promising PO activity was obtained for Cu supported on high surface area SiO(2) and the multimetallic systems exhibit synergistic effects that increased the desired PO yield by several folds for Ag promoted with Cu on SiO(2) after screening a large number of catalysts by a high throughput testing technique.
Immobilization of yeast cells in several conducting polymer matrices Balci, Z; Akbulut, Ural; Toppare, Levent Kamil; Alkan, S; Bakir, U; Yagci, Y (2002-01-01) Immobilization of yeast cells (Saccharomyces cerevisiae) in different polymer matrices was performed by constant potential electrolysis. These matrices were polypyrrole (PPy); poly(methyl methacrylate)/polypyrrole (,PMMA/PPy) and thiophene-capped poly(methyl methacrylate)/ polypyrrole (TPMMA/PPy). The characterization of PMMA/PPy copolymer was achieved by Fourier-transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM). The invertase activity of...
Improving the dyeability of poly(lactic acid) fiber using organoclay during melt spinning Tayfun, Umit; DOĞAN, Mehmet (2016-06-01) The dyeability of poly(lactic acid) (PLA) fiber was tried to be improved with the addition of organoclay during melt spinning process. The tensile, thermal and morphological properties of the fiber samples were characterized by tensile testing, differential scanning calorimeter, X-ray diffraction and transmission electron microscopy, respectively. The effects of disperse dye type, dye bath and organoclay concentrations on the dyeability and wash fastness properties of the fiber samples were investigated. It...
Synthesis and pyrolysis of ABC type miktoarm star copolymers with polystyrene, poly(lactic acid) and poly(ethylene glycol) arms Ozlem, Suriye; Iskin, Birol; Yilmaz, Gorkem; Kukut, Manolya; Hacaloğlu, Jale; Yagci, Yusuf (2012-10-01) An ABC type miktoarm star copolymer possessing polystyrene (PS), poly(lactic acid) (PLA) and poly(ethylene glycol) (PEG) arms was synthesized by combining Atom Transfer Radical Polymerization (ATRP) and Ring Opening Polymerization (ROP) with two click chemistries, namely thiol-ene and copper catalyzed azide-alkyne cycloaddition (CuAAC). For this purpose, a core 1-(allyloxy)-3-azidopropan-2-ol with allyl and azide functionalities was synthesized in two steps. Then, clickable polymers, polystyrene with thiol ...

Citation Formats

T. Baouz, F. Rezgui, and Ü. Yılmazer, “Ethylene-methyl acrylate-glycidyl methacrylate toughened poly(lactic acid) nanocomposites,” JOURNAL OF APPLIED POLYMER SCIENCE, pp. 3193–3204, 2013, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/56932.