Comparison of Polyamide 66-Organoclay Binary and Ternary Nanocomposites

Date

2009-09-01

Author

Mert, Miray
Yılmazer, Ülkü

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

158
views

0
downloads

Polyamide 66-Lotader (R) 2210 blends (95/5 w/w), polyamide 66-Cloisite (R) 15A binary nanocomposites (98/2 w/w), and polyamide 66-Lotader (R) 2210-Cloisite (R) 15A ternary nanocomposites (93/5/2 w/w) were prepared by twin-screw extrusion, and the changes in mechanical properties, morphology, and flow properties of the materials prepared by different mixing sequences were investigated in this study. Lotader (R) 2210, which is a random terpolymer of ethylene, butyl acrylate, and maleic anhydride, was used as the impact modifier for polyamide 66 blends as well as polyamide 66 based nanocomposites. The best dispersion level, highest mechanical properties, highest viscosity values, and smallest elastomeric domain sizes were obtained for the mixing sequence in which all the components forming the ternary nanocomposites were compounded simultaneously. Incorporation sequence of either the organoclay or the impact modifier into the polymeric matrix was varied in the other mixing sequences, and this resulted in poorer distribution of the organoclay platelets and elastomeric domains in the matrix owing to insufficient shear intensity applied on the components in a single extrusion step. Toughness values of the ternary nanocomposites were improved compared with the binary nanocomposites upon addition of the impact modifier into polymer-organoclay combination. It was concluded that the compounding sequence of the components plays a significant role in the dispersion of organoclay and the properties of the nanocomposites, because it directly affects the interaction between the different phases. (C) 2009 Wiley Periodicals, Inc. Adv Polym Techn 28: 155-164, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/adv.20158

Subject Keywords

Organic Chemistry, General Chemical Engineering, Polymers and Plastics

URI

https://hdl.handle.net/11511/57124

Journal

ADVANCES IN POLYMER TECHNOLOGY

DOI

https://doi.org/10.1002/adv.20158

Collections

Graduate School of Natural and Applied Sciences, Article

Suggestions

OpenMETU
Core

Comparison of Natural Halloysite With Synthetic Carbon Nanotubes in Poly(lactic acid) Based Composites Erpek, Canan Esma Yeniova; ÖZKOÇ, GÜRALP; Yılmazer, Ülkü (Wiley, 2017-11-01) The objective of this study is to compare the mechanical properties, structure and degradability of the nanocomposites prepared with tubular nanofillers, halloysite (HNT) and carbon nanotube (CNT) in poly(lactic acid) (PLA), and thermoplastic polyurethane (TPU) toughened PLA (T-PLA) matrices. In the PLA matrix, CNT increased, whereas HNT decreased the tensile strength with increasing filler content. Also, the elongation at break and impact strength decreased with increasing CNT content, but these properties...
DIPOLE-MOMENTS OF ISOTACTIC AND ATACTIC POLY(PROPYLENE OXIDE) SAMPLES KUCUKYAVUZ, Z; ALYURUK, K; AHMAD, AM (Elsevier BV, 1991-01-01) Dipole moments of poly(propylene oxide) (PPO) samples with different tacticities were determined from dielectric constant and refractive index increment measurements, which were performed on dilute toluene and isooctane solutions. In contrast to previous reports, both refractive index increments and the dipole moment ratios showed a marked dependence on the tacticities of the samples. The dipole moment ratios of isotactic samples were greater than unity and decreased with increasing sequence concentration...
Electrochemical and Optical Studies of Furan and Thieno[3,2-b]thiophene End Capped Benzotriazole Derivatives AKBASOGLU, Naime; BALAN, Abidin; BARAN, Derya; Çırpan, Ali; Toppare, Levent Kamil (Wiley, 2010-12-01) Two new 2-dodecyl benzotriazole (BTz) based donor-acceptor-donor (DAD) type polymers were synthesized and characterized in terms of their electrochemical and spectral properties. These DAD type polymers were synthesized electrochemically from furan or thieno[3,2-b]thiophene (TT) endcapped BTz monomers. Furan based and thieno[3,2-b]thiophene based monomers showed monomer oxidations at 1.15 and 1.25 V, respectively, which eased the formation of conducting polymer films without overoxidation. Cyclic voltammetr...
EVALUATION OF SECOND VIRIAL COEFFICIENTS FROM SATURATION DATA Orbey, H.; Orbey, N. (Informa UK Limited, 1989-3) A data reduction technique is introduced for the evaluation of second virial coefficients of gases at subcritical temperatures. The method makes use of the vapor-liquid equilibrium data, i.e., temperature, saturation pressure, liquid and vapor molar volumes and can be used to obtain second virial coefficients of a wide variety of fluids including polar, associating and quantum gases. The calculated second virial coefficients are in good agreement with their counterparts from literature, which are obtained f...
Fused structures in the polymer backbone to investigate the photovoltaic and electrochromic properties of donoracceptor-type conjugated polymers CEVHER, ŞEVKİ CAN; UNLU, Naime Akbasoglu; OZELCAGLAYAN, Ali Can; APAYDIN, Dogukan Hazar; Udum, Yasemin Arslan; Toppare, Levent Kamil; Çırpan, Ali (Wiley, 2013-05-01) In this study, two new benzotriazole (BTz) and dithienothiophene (DTT) containing conjugated polymers were synthesized. After successful characterizations of the monomers by proton-nuclear magnetic resonance (1H NMR) and carbon-NMR (13C NMR) techniques, poly(4-(dithieno[3, 2-b:2,3-d]thiophen-2-yl)-2-(2-octyldodecyl)-2H-benzo[d][1,2,3] triazole) P1 and poly(4-(5-(dithieno[3,2-b:2,3-d]thiophen-2-yl)thiophen-2-yl)-2-(2-octyldodecyl)-7-(thiophen-2-yl)-2H-benzo[d][1,2,3]triazole) P2 were synthesized via a typica...

Citation Formats

M. Mert and Ü. Yılmazer, “Comparison of Polyamide 66-Organoclay Binary and Ternary Nanocomposites,” ADVANCES IN POLYMER TECHNOLOGY, pp. 155–164, 2009, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/57124.