Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Open Access Guideline
Open Access Guideline
Postgraduate Thesis Guideline
Postgraduate Thesis Guideline
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
Filtration testing of a ceramic capillary filter produced from a high-silica glaze
Date
2002-07-01
Author
San, O
Hoşten, Çetin
Metadata
Show full item record
This work is licensed under a
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License
.
Item Usage Stats
152
views
0
downloads
Cite This
A laboratory procedure for the production of a ceramic capillary filter from a high-silica glaze was described and its filtration response was tested in dead-end and periodic vacuum filtration modes with suspensions containing micron and sub-micron clay particles obtained from a ceramic factory wastewater stream. The same glaze raw material ground to two different levels of fineness was used for the production of the porous ceramic substrate and its surface coating. The coating particulate sol was deposited onto the substrate by the filtration technique. The filter substrate and the coating were sintered at relatively lower temperatures (950-980degreesC) than conventional ceramic sintering. The filter indicated a non-clogging behavior in both of the filtration modes, and proved a potential for filtering large volumes of dilute clay slurries by periodic filtration operations.
Subject Keywords
Filtration
URI
https://hdl.handle.net/11511/58042
Journal
MINERALS ENGINEERING
DOI
https://doi.org/10.1016/s0892-6875(02)00079-1
Collections
Department of Mining Engineering, Article
Suggestions
OpenMETU
Core
Silver nanoparticles-tragacanth gel as a green membrane for effective extraction and determination of capecitabine
Hajizadeh, Salahaddin; Farhadi, Khalil; Molaei, Rahim; Forough, Mehrdad (Wiley, 2020-07-01)
A novel eco-friendly and effective electromembrane extraction method combining high-performance liquid chromatography with UV detection was developed for the enrichment and determination of capecitabine. Tragacanth-silver nanoparticles conjugated gel was prepared by dissolving the tragacanth powder in synthesized silver nanoparticles solution and was used as a green membrane in electromembrane extraction. The porosity and presence of silver nanoparticles in the gel were characterized by field emission scann...
Adsorption of volatile organic compounds on soil and prediction of desorption breakthroughs
Yeo, SD; Tuncer, E; Akgerman, A (Informa UK Limited, 1997-01-01)
Vapor extraction of volatile organic compounds from soil was investigated by performing adsorption and desorption experiments of trichloroethylene, trichloroethane, and chlorobenzene on soil particles. The adsorption breakthrough curves were obtained using a dynamic response technique based on frontal analysis chromatography. The shape of the breakthrough curves indicated that the adsorption process was close to an ideal adsorption system of no mass transfer resistance, no axial dispersion, and infinitesima...
Polycarbonate-polypyrrole mixed matrix gas separation membranes
Hacarlioglu, P; Toppare, Levent Kamil; Yılmaz, Levent (Elsevier BV, 2003-11-01)
The gas separation properties of the polycarbonate-polypyrrole mixed matrix membranes were evaluated based on the introduction of conducting polymer as powder fillers. The electrically conductive fillers are obtained from two main synthesis routes namely electrochemical and chemical methods. The permeation properties of polycarbonate-polypyrrole systems are highly dependent on the synthesis method (electrochemical or chemical) and also the membrane casting conditions (casting solvent type). The introduction...
Nanofiltration and Reverse Osmosis for Reuse of Indigo Dye Rinsing Waters
Uzal, Nigmet; Yılmaz, Levent; Yetiş, Ülkü (Informa UK Limited, 2010-01-01)
A membrane based treatment strategy was developed for the possible recycling of rinsing wastewater from indigo dyeing to the process itself. Performances of three different nanofiltration (NF) (NF 270 and NF 90, Dow Film Tech, USA and NF 99, Alfa Laval, Denmark) and two different reverse osmosis (RO) (HR 98 PP and CA 995 PE, Alfa Laval, Denmark) membranes were investigated with wastewater collected from the first post-rinsing tank of indigo dyeing process of a denim manufacturing plant. Dead-end microfiltra...
Ethylene and acetaldehyde production by selective oxidation of ethanol using mesoporous V-MCM-41 catalysts
Gucbilmez, Yesim; Doğu, Timur; Balci, Suna (2006-05-10)
Vanadium-incorporated MCM-41 type catalytic materials, which were synthesized by a direct hydrothermal synthesis procedure, showed very high activity and high selectivity in the production of ethylene from ethanol in an oxidative process. Ethylene selectivity showed a significant increase with an increase in temperature over 300 degrees C, while relatively high acetaldehyde selectivities were observed at lower temperatures. An ethylene yield value of 0.66 obtained at 400 degrees C with an O-2/ethanol feed r...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
O. San and Ç. Hoşten, “Filtration testing of a ceramic capillary filter produced from a high-silica glaze,”
MINERALS ENGINEERING
, pp. 553–556, 2002, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/58042.