Compression of granular materials due to wetting.

1984
Sipahi, E. Can

Suggestions

Compression of solid and annular circular discs bonded to rigid surfaces
Pinarbasi, Seval; Mengi, Yalcin; Akyüz, Uğurhan (Elsevier BV, 2008-08-01)
Although it is noted in the literature that the presence of a central hole in an elastic layer bonded to rigid surfaces can cause significant drop in its compression modulus not much, attention is given for investigating thoroughly and in detail the influence of the hole oil the layer behavior. This paper presents analytical solutions to the problem ofthe uniform compression of bonded hollow circular elastic layers, which includes solid circular layers as a special case as the radius of hollow section vanis...
Consolidation of a soil layer subjected to an axiaymmetric loading.
Erdemli, Mehmet; Department of Engineering Sciences (1974)
Deformation of porous media under syrface loading.
Ural, Ahmet Namık; Department of Engineering Sciences (1979)
Compression behaviour of partially saturated fine grained soils
Sahin, Burak; Wasti, Yıldız; Özkan, Yener; Department of Civil Engineering (1996)
Reinforcement of polyesters by boron minerals
Akgün, Aydın Mert; Tinçer, Teoman; Özdemir, Tonguç; Department of Polymer Science and Technology (2015)
Polymers are used in areas where exposure to high-energy radiation might occur. Main effects of irradiation on polymers are crosslinking, chain scission and oxidation. Radiation resistance of polymers depends on structure, additives, or irradiation conditions. Since boron is highly effective material against radiation, especially against neutron radiation, with its high absorption cross section, boron products is used for radiation applications. The aim of this study is to investigate the effects of differe...
Citation Formats
E. C. Sipahi, “Compression of granular materials due to wetting.,” Middle East Technical University, 1984.