Cracked strip problem subjected to a nonsymmetric transverse loading by a stamp.

1989
Demir, Yücel
Show full item record
132
views
0
downloads
https://hdl.handle.net/11511/6208
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Cracked infinite cylinder with two rigid inclusions under axisymmetric tension
Toygar, M. Evren; Gecit, M. Rusen (2006-08-01)
This paper considers the problem of an axisymmetric infinite cylinder with a ring shaped crack at z = 0 and two ring-shaped rigid inclusions with negligible thickness at z = +/- L. The cylinder is under the action of uniformly distributed axial tension applied at infinity and its lateral surface is free of traction. It is assumed that the material of the cylinder is linearly elastic and isotropic. Crack surfaces are free and the constant displacements are continuous along the rigid inclusions while the stre...
Cracked elastic annulus bonded to rigid cylinder
Yılmaz, Engin; Geçit, M. Ruşen; Department of Engineering Sciences (2005)
In this study, a long annulus bonded to a rigid cylinder containing an axisymmetric circumferential crack of width (d-c) at the midplane is considered. The material of the annulus is assumed to be linearly elastic and isotropic. The external surface of the annulus is free of stress. Surfaces of the crack are subject to distributed compressive loads. The Fourier and Hankel transform techniques are used to solve the governing equations which are reduced to a singular integral equation for crack surface displa...
Crack problem in semi-infinite cantilever orthotropic strip
Çolakoğlu, Mehmet Ali; Yahşi, Selçuk; Department of Mechanical Engineering (1995)
Cracked semi-infinite cylinder and finite cylinder problems
Kaman, Mete Onur; Geçit, M. Ruşen; Department of Engineering Sciences (2006)
This work considers a cracked semi-infinite cylinder and a finite cylinder. Material of the cylinder is linearly elastic and isotropic. One end of the cylinder is bonded to a fixed support while the other end is subject to axial tension. Solution for this problem can be obtained from the solution for an infinite cylinder having a penny-shaped rigid inclusion at z = 0 and two penny-shaped cracks at z = ± L. General expressions for this problem are obtained by solving Navier equations using Fourier and Hankel...
Cracked semi-infinite cylinder and finite cylinder problems
Kaman, Mete Onur; Gecit, Mehmet Rusen (Elsevier BV, 2006-12-01)
This work considers the analysis of a cracked semi-infinite cylinder and a finite cylinder. Material of the cylinder is assumed to be linearly elastic and isotropic. One end of the cylinder is bonded to a fixed support while the other end is subjected to axial tension. Solution of this problem can be obtained by superposition of solutions for an infinite cylinder subjected to uniformly distributed tensile load at infinity (I) and an infinite cylinder having a penny-shaped rigid inclusion at z = 0 and two pe...
Citation Formats
Y. Demir, “Cracked strip problem subjected to a nonsymmetric transverse loading by a stamp.,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr