Optimization of process parameters in cylinorical plunge grinding.

Date

1989

Author

Tola, Orhan

Metadata

Show full item record

Item Usage Stats

105
views

0
downloads

URI

https://hdl.handle.net/11511/6213

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Optimization of chemical vapor deposition process parameters for aluminizing Ertürk, Umutcan; İmer, Muhsine Bilge (2016-08-01) Ni-based super alloys such as Inconel 738LC, MAR-M-200, CMSX-4 are used in the hot sections of industrial gas turbines due to their excellent mechanical strength and creep resistance at high service temperatures. To protect turbine blades from thermo-mechanical failure, oxidation/corrosion resistant coatings are necessary to extend the life time. For this purpose, diffusion coatings including chromized, siliconized, aluminide coatings have been studied by different groups. Among them, aluminide coatings are...
Optimization of the sound source position for shaping acoustically-structurally coupled cavities Sorguç, Arzu; Shi, Qinzhong; Akagunduz, Haldun (2002-12-01)
Optimization of the sound source position for shaping acoustically-structurally coupled cavities Sorguç, Arzu; Shi, Qinzhong; Akagunduz, Haldun (null; 2001-12-01) In this study, sound field inside acoustically-structurally coupled rectangular cavity excited by structural loading and sound sources is shaped by optimizing the position of the sound source. In the optimization, Most Probable Optimal Design (MPOD) based on Holographic Neural Network is employed and the results are compared with Sequential Quadratic Programming (SQP). It is shown that source position, rather than source strength, is more effective in acoustically controlled modes. The nodal positions for i...
Optimization of conditions of metallothermic reduction of rare earth preconcenrtrates Yılmaz, Serkan; Topkaya, Yavuz Ali; Department of Metallurgical and Materials Engineering (2007) Rare earth ferrosilicon alloy is an important additive for ferrous metallurgy. It is mainly used to control the detrimental effects of sulfur in steel and to modify graphite structures in cast iron. The aim of this study was to optimize the conditions for the production of rare earth ferrosilicon alloy by metallothermic reduction process using a preconcentrate prepared from a bastnasite type of ore present in the Beylikahır-Eskişehir region of Turkey. In this study, the rare earth preconcentrate was reduced...
OPTIMIZATION OF PRODUCTION PARAMETERS OF ADI FOR INDUSTRY APPLİCATİONS Kalkanlı, Ali(2013-12-31) OPTIMIZATION OF PRODUCTION PARAMETERS OF ADI FOR INDUSTRY APPLİCATİONS

Citation Formats

O. Tola, “Optimization of process parameters in cylinorical plunge grinding.,” Middle East Technical University, 1989.