Chain-extended bismaleimides .1. A study of chain-extended bismaleimides as matrix elements in carbon fiber composites

Yerlikaya, Z
Erinc, NK
Oktem, Z
Bayramlı, Erdal
A series of chain-extended bismaleimide resins as matrix elements in carbon fibers were cured and characterized in terms of their thermal and thermomechanical properties. The cured resins were stable up to 430 degrees C and EDABMI/MDA has the highest T-g value and the lowest loss modulus value. To understand the compatibility and the degree of adhesion between the resin and the fiber, their surface properties were determined in terms of the surface energy component and single-fiber pull-out tests. The surfaces of the resins were found to have a basic character. The resins containing ether groups have a higher degree of basicity than does the resin containing methylene groups. Similarly, an increasing trend in the interlaminar shear strength (ILSS) and the work of adhesion values were observed with the increasing number of the ether groups in the resin structure. (C) 1996 John Wiley & Sons, Inc.


Viscoelastic characteristics of chain extended/branched and linear polyethylene terephthalate resins
Yılmazer, Ülkü; Xanthos, M; Bayram, Göknur; Tan, V (Wiley, 2000-03-01)
Two chemically modified chain extended/branched polyethylene terephthalate (PET) resins and one unmodified resin, considered to be linear, were characterized in terms of their melt flow, die swell, and viscoelastic properties. The three resins had reportedly similar nominal intrinsic viscosities but exhibited different viscoelastic behavior. The modified resins had lower melt flow index, higher die swell, higher complex viscosity and higher storage modulus than the unmodified one. The Cole-Cole plots of the...
Poly(methyl methacrylate) hybrid syntactic foams with hollow glass microspheres and polyhedral oligomeric silsesquioxanes
Ozkutlu, Merve; Dilek Hacıhabiboğlu, Çerağ; Bayram, Göknur (Wiley, 2019-08-10)
The study aims to produce poly(methyl methacrylate) (PMMA)-based lower density syntactic foams with hollow glass microspheres (HGMs) and to improve their mechanical properties by the addition of polyhedral oligomeric silsesquioxanes (POSSs) while maintaining the thermal properties of the neat polymer. First to understand the effect of POSS addition, PMMA-POSS composites with octaisobutyl and octaphenyl POSS were produced through extrusion. Higher relative flexural and impact strengths were obtained with POS...
Dynamic mechanical properties of dental base material reinforced with glass fiber
Karacaer, O; Dogan, A; Dogan, OM; Usanmaz, Ali (Wiley, 2002-08-22)
Dynamic mechanical properties of poly(methyl methacrylate) (PMMA) reinforced with glass fibers were investigated. The composite used as dental base material contained other additives for different purposes to give the same appearance as natural dentals. The fiber-polymer bonding and orientation of fibers in polymer matrix are very important in the application of the product. To see that, the fibers were treated with silane and compared with untreated fibers. The commercial polymer and monomer used were the ...
Synthesis and characterization of multi-hollow opaque polymer pigments
Asmaoglu, Serdar; Gündüz, Güngör; MAVİŞ, BORA; Colak, Uner (Wiley, 2016-08-05)
A new generation multihollow opaque polymer pigment was synthesized by suspension polymerization of water-in-oil-in-water emulsion method, where methyl methacrylate and ethylene glycol dimethacrylate monomer mixture was used as oil phase. The effects of surfactant and cosurfactant composition in terms of hydrophilic/lipophilic balance on the stability of the water-in-oil emulsion and the size of water droplets were studied. Low droplet sizes and the optimum stability were obtained with Span 80&Tween 80 surf...
Flexible and conducting composites of polypyrrole and polydimethylsiloxane
Cahmak, G; Kucukyavuz, Z; Kucukyavuz, S (Wiley, 2004-07-15)
Conductive and flexible polydimethylsiloxane (PDMS)/polypyrrole (PPy) composites were synthesized electrochemically. Electrochemical syntheses were performed at +1.10 V by using p-toluene sulfonic acid (PTSA) as supporting electrolyte and water as solvent. Composites were characterized by cyclic voltammetry, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, and Fourier transform infrared spectroscopy. Conductivity measurements and mechanical tests were also perform...
Citation Formats
Z. Yerlikaya, N. Erinc, Z. Oktem, and E. Bayramlı, “Chain-extended bismaleimides .1. A study of chain-extended bismaleimides as matrix elements in carbon fiber composites,” JOURNAL OF APPLIED POLYMER SCIENCE, pp. 537–542, 1996, Accessed: 00, 2020. [Online]. Available: