Timber joint design: the geometric breakdown method

Date

2002-11-01

Author

Erman, E

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

231
views

0
downloads

A large number of joints are developed as a result of various timber construction techniques, structural efficiency and cultural differences. Many joints are not used because they are not adapted or are inconvenient for modern manufacturing and construction technologies. Nonetheless, this construction heritage can be harnessed and adjusted for contemporary use. Significant cultural and social differences in timber jointing and construction technologies are reviewed. The Geometric Breakdown Method is developed to analyse the geometry of timber joints for structural, carpentry and construction considerations. Using this method, traditional and modern joints can be understood better and designers can use accumulated construction knowledge to create new joint designs in a systemic manner.

Subject Keywords

Civil and Structural Engineering, Building and Construction

URI

https://hdl.handle.net/11511/64221

Journal

BUILDING RESEARCH AND INFORMATION

DOI

https://doi.org/10.1080/09613210210150991

Collections

Department of Architecture, Article

Suggestions

OpenMETU
Core

Strengthening of reinforced concrete frames with engineered cementitious composite panels Ayatar, Mehmet Engin; Canbay, Erdem; Binici, Barış (Thomas Telford Ltd., 2020-04-01) Infill walls in reinforced concrete frames are susceptible to failure owing to their brittle nature. Their interaction with boundary columns during earthquakes may also cause shear damage in the columns. It is crucial to employ effective seismic strengthening strategies in order to mitigate the seismic risk induced by the infill walls. In this study, a new strengthening technique, conducted by bonding engineered cementitious composite (ECC) precast panels onto infill walls, was investigated. Three reinforce...
Seismic performance of multisimple-span bridges retrofitted with link slabs Caner, Alp; Zia, P. (American Society of Civil Engineers (ASCE), 2002-03-01) During earthquakes multisimple-span bridges are vulnerable to span separation at their expansion joints. A common way of preventing unseating of spans is to have cable or rod restrainers that provide connections between adjacent spans. Alternatively, dislocation of the girders can be controlled with a link slab that is the continuous portion of the bridge deck between simple spans. Seismic retrofit with link slab should be more cost-effective than the existing methods when it is performed during redecking o...
Seismic strengthening of reinforced concrete frames by precast concrete panels BARAN, MEHMET; Susoy, M.; Okuyucu, D.; Tankut, T. (Thomas Telford Ltd., 2011-05-01) An innovative occupant-friendly retrofitting technique has been developed for reinforced concrete (RC)-framed structures which constitute the major portion of the existing building stock. The idea is to convert the existing hollow brick infill wall into a load-carrying system acting as a cast-in-place concrete shear wall by reinforcing it with relatively thin high-strength precast concrete panels epoxy bonded to the plastered infill wall and epoxy connected to the frame members. In this study, results of 11...
Seismic vulnerability, behavior and design of tunnel form building structures Balkaya, C; Kalkan, E (Elsevier BV, 2004-12-01) Multi-story reinforced concrete tunnel form buildings are one of the common structural types in regions prone to high seismic risk due to the buildings inherent earthquake resistance and ease of construction. Despite their good performance during earthquakes in 1999 in Turkey, and abundance of such structures scattered worldwide, current seismic codes and design provisions provide insufficient guidelines for their seismic design. As a compensatory measure, a series of modal and nonlinear static analyses are...
Bonding efficiency of roller compacted concrete with different bedding mixes Özcan, Sinan; Yaman, İsmail Özgür; Department of Civil Engineering (2008) Roller Compacted Concrete (RCC) has rapidly evolved from a concept to a material and a process which is used throughout the world for faster and more economical construction of dams. Currently, there are more than 250 RCC dams, completed or under construction, in the world. On the other hand, currently, there are only two RCC dams completed (Suçatı and Cindere Dams) and two under construction (Beydağ and Çine Dam) in Turkey. RCC dams are constructed in a series of compacted layers usually 30 cm in thickness...

Citation Formats

E. Erman, “Timber joint design: the geometric breakdown method,” BUILDING RESEARCH AND INFORMATION, pp. 446–469, 2002, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/64221.