Theoretical and thermal characterization of a wideband perfect absorber for application in solar cells

2016-12-01
Rufangura, Patrick
Sabah, Cumali
This paper suggests a metamaterial (MTM) absorber structure to be used for efficiency improved solar cell. The proposed MTM absorber consists of the topmost three concentric circular ring resonators, and a ground metal plane sandwiched to the top layer with a dielectric spacer. Numerical simulation and theoretical (interference theory) studies on the proposed design show a wideband with near-perfect (>99%) absorption response in the visible frequency region of the solar spectrum. Thermal characterization of the suggested design is also conducted in order to investigate its absorption capability at different temperatures. The proposed MTM absorber design is believed to be an outstanding candidate toward high-efficiency solar photovoltaic cell.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Suggestions

Dual-band high-frequency metamaterial absorber based on patch resonator for solar cell applications and its enhancement with graphene layers
Ustunsoy, Mehmet Pasa; Sabah, Cumali (2016-12-05)
In this paper, a dual-band high-frequency metamaterial absorber based on patch resonator is designed and analyzed for solar cells. In order to obtain a metamaterial absorber, metal-semiconductor-metal layers are combined. The results of the designed structure are shown in the infrared and visible ranges of solar spectrum. Structural parameters and dimensions of the device have a significant importance on the performance of the designed absorber. The simulations are carried out with full-wave electromagnetic...
Improvement of multiband absorption with different technics (graphene, ito, and hole) for metamaterial absorber at optical frequencies
Mulla, Batuhan; Sabah, Cumali (2018-10-01)
Three absorption improvement techniques are numerically applied to a multiband metamaterial absorber design for solar energy harvesting. These techniques are the following: the reshaping of the back metallic plate, the integrating of graphene sheets, and the utilizing of indium tin oxide (ITO), in the design. Based on numerical simulation results, each of these methods has the capacity to enhance total absorption rates. In addition to the enhancement in the total absorption rates, new absorption peaks are a...
Fabrication and investigation of extremely thin CdTe absorber layer solar cells
Hosseini, Arezoo; Erçelebi, Ayşe Çiğdem; Turan, Raşit; Department of Physics (2016)
Extremely thin absorber layer (ETA) solar cells aim to combine the advantages of using very thin and cheaply produced absorber layer on nano structured substrates with stability of all-solid-state solar cells. This type of photovoltaic devices use a nano structured interpenetrating heterojunction of thin light-absorbing layer at the interface between an n- and p-type semiconductors. N-type nano structured TiO2 layer is deposited on a Transparent Conducting Oxide coated glass (TCO) substrate, following with ...
Design and characterization of a dual-band perfect metamaterial absorber for solar cell applications
Rufangura, Patrick; Sabah, Cumali (2016-06-25)
This paper proposes a metamaterial absorber design for solar energy harvesting using a simplified and symmetric structure. A unit cell of this design consists of three important layers namely, the bottom metallic layer, which is gold lossy, the intermediate layer: made of a lossy dielectric material that is gallium arsenide and patches which formed by a combination of gold and gallium arsenide. These three important layers are being carefully arranged at the top of a dielectric spacer. The geometric structu...
Perfect metamaterial absorber design for solar cell applications
Mulla, B.; Sabah, C. (2015-07-03)
A new perfect metamaterial absorber based on metal-dielectric layer combination is designed and investigated to be used in solar cell application. The designed structure is particularly presented in the range of solar spectrum in order to utilize the solar energy effectively. Parametric studies with respect to the dimensions of the structure are carried out to characterize the absorber. According to the results, it is found that the metamaterial absorber has 99.99% absorption at 403.5 THz. In addition, the ...
Citation Formats
P. Rufangura and C. Sabah, “Theoretical and thermal characterization of a wideband perfect absorber for application in solar cells,” APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, pp. 0–0, 2016, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/64384.