Vibration Analysis of a Simply Supported PCB with a Component-An Analytical Approach

Date

2008-12-12

Author

Aytekin, Banu
Ozguven, Nevzat

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

175
views

0
downloads

It is a well known fact that vibration is one of the most important loading condition in electronic systems. This study deals with dynamic analysis of a printed circuit board (PCB) with a component on it under vibratory loading. The objective of the study is to develop an analytical model for common PCB configurations and electronic components on them in order to predict dynamics of the assembly under vibratory loading, and thus to study the effects of component location. As an application, in this paper an analytical model of a simply supported PCB with a component is presented. The validity of the two degree of freedom analytical model is demonstrated by comparing numerical results for random vibration input with those of a finite element model.

Subject Keywords

Finite element methods, Electronic components, Aerodynamics, Printed circuits, Analytical models, Springs, Lead, Vibration control, Electronic equipment testing, Damping

URI

https://hdl.handle.net/11511/64463

DOI

https://doi.org/10.1109/eptc.2008.4763589

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Vibration isolation of inertial measurement unit Çınarel, Dilara; Ciğeroğlu, Ender; Department of Mechanical Engineering (2012) Sensitive devices are affected by extreme vibration excitations during operation so require isolation from high levels of vibration excitations. When these excitation characteristics of the devices are well known, the vibration isolation can be achieved accurately. However, it is possible to have expected profile information of the excitations with respect to frequency. Therefore, it is practical and useful to implement this information in the design process for vibration isolation. In this thesis, passive ...
Real-Time Speed and Position Estimation Using Rotor Slot Harmonics Keysan, Ozan; Ertan, Hulusi Bülent (2013-05-01) It is well known that slotting harmonics exist in most of the electrical machines. So far, these harmonics are mainly identified using spectral estimation techniques. However, this approach requires long sampling and computation periods. In this study, a novel speed and position estimation method based on identification of rotor slot harmonics (RSH) that does not require any kind of spectral analysis is proposed. The required information is extracted by demodulating the information available in an external ...
Vibration fatigue analysis of structures installed on air platforms Eldoğan, Yusuf; Ciğeroğlu, Ender; Department of Mechanical Engineering (2012) Although a component satisfies all operating static requirements, failures can still occur due to vibration induced fatigue. Vibration induced fatigue is a frequent phenomenon, in cases where the natural frequencies of the structures are excited by the loading. Hence, the methods which consider all dynamic characteristic of the structure should be used to obtain accurate fatigue life predictions. These methods in frequency domain are called vibration fatigue methods which give accurate, reliable and fast re...
ESTIMATION OF WEAR IN DRY FRICTION DAMPERS AND ITS EFFECT ON VIBRATION REDUCTION Çardak, Aykut; Ciğeroğlu, Ender; Department of Mechanical Engineering (2022-8-31) Although friction is mostly considered an undesirable phenomenon due to its energy dissipation characteristic, specially designed dry friction dampers utilize this feature to reduce the dynamic response of the system at the resonant frequencies. However, fretting wear due to dry friction during the operational life of the structure may drastically shift the performance from the initial design point and eventually cause drastic failures. Hence, it is important to establish a sophisticated algorithm that coup...
Design optimization of a laser path length controller through numerical analysis and experimental validation Fenercioglu, Tevfik Ozan; Yalçınkaya, Tuncay (IOS Press, 2019-01-01) As an integral part of Strapdown Inertial Navigation Systems, ring laser gyroscopes (RLG) are exposed to joint loading conditions where thermal, static and dynamic loads occur simultaneously. The effects of different loading conditions on overall RLG performance should be addressed in parallel for an optimum design. A crucial aspect in this process is the development of the path length controller (PLC), consisting of a mirror, a composite piezo electric bending actuator and other motion transfer elements. T...

Citation Formats

B. Aytekin and N. Ozguven, “Vibration Analysis of a Simply Supported PCB with a Component-An Analytical Approach,” 2008, p. 1178, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/64463.