Determination of best fitting freguensy distribution to annual flood series for Turkey.

1987
Gokcebag, Mehmet
Show full item record
105
views
0
downloads
https://hdl.handle.net/11511/6474
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Determination of optimum values for voltage setpoints of power stations in Turkey
Elma, İsmail; Güven, Ali Nezih; Tör, Osman Bülent; Department of Electrical and Electronics Engineering (2014)
Voltage control is performed in three hierarchical levels in Turkish power system: primary, secondary and tertiary voltage control. Primary and secondary voltage controls are defined as the regulation of the voltage at the generator terminal and at the high voltage busbar of the power plant according to the pre-determined setpoints. The determination of the voltage setpoints for the power plants, which is defined as the tertiary voltage control, is performed by the operators in National and Regional Load Di...
Determination of environmental quality standard -based discharge limits and mixing zones for tersakan sub-basin of Yeşilirmak river
Çelebi, Sarp; Ünlü, Kahraman; Department of Environmental Engineering (2019)
The control of point source discharges to rivers has become more elaborate since the establishment of environmental quality standards (EQSs). Many countries including Turkey have set EQS values for various contaminants of concern (CoCs) i.e. maximum concentration limits that would not cause detrimental effects on the health of the human-beings or the overall environment. One important challenge of achieving these EQSs is to reconcile the effluent limits that are technically and economically achievable with ...
Determination of wind power potential and optimal wind power plant locations in Turkey
Çetinay, Hale; Güven, Ali Nezih; Tör, Osman Bülent; Department of Electrical and Electronics Engineering (2014)
Due to increased environmental concerns, utilization of the renewable energy, especially the wind power, gains importance. Like developed countries which have set their renewable energy targets for the long term integration, Turkish government has also set the goal as 20 GW of total wind power installed capacity in 2023. In this thesis, the wind power potential in Turkey is analyzed and different cases are studied to determine optimal locations for wind power plant establishment. In order to determine the w...
DETERMINATION OF AGGLOMERATION CHARACTERISTICS OF OLTU-STONE (JET STONE) WASTES
Bawani, Muhammad Raheel; Arol, Ali İhsan; Tozsin, Gülşen; Department of Mining Engineering (2021-12-17)
Oltu-stone (Jet Stone), also known as black amber, is a fossilized, organic, and natural material formed by the transformation of certain trees under high pressure. It is called Oltu-stone because its occurrences are primarily located in the Oltu district of Erzurum. Generally, it is mined by small miners from nearby villages using rather primitive methods. After a rough sorting at the mine site, Oltu-stone is mainly used in manufacturing worry beads, tespih, and to a lesser extent, certain ornamental goods...
Determination of waste recieving capacity of İzmit Bay.
Uğurlu, Ayşenur; Balkaş, Tuğrul; Department of Environmental Engineering (1988)
Citation Formats
M. Gokcebag, “Determination of best fitting freguensy distribution to annual flood series for Turkey.,” Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr