PREPARATION AND CHARACTERIZATION OF PERLITE-FILLED HIGH-DENSITY POLYETHYLENES .2. THERMAL AND FLOW PROPERTIES

1994-11-21
AKINOKTEM, G
TINCER, T
Thermal and flow properties of perlite-filled high-density polyethylenes (HDPE), studied in the first part of the paper, are discussed. Maximum peak temperatures of endotherms (T-mp) and the corresponding relative peak heights were examined by differential scanning calorimetry (DSC). The data obtained from a Brabender torque rheometer were evaluated to find the melt viscosities at low shear rate during preparation of perlite-HDPE composites. The filler concentration, types of HDPEs, and the use of gamma-APS are found to be effective and influential factors on the thermal and flow properties of these composites. (C) 1994 John Wiley and Sons, Inc.
JOURNAL OF APPLIED POLYMER SCIENCE

Suggestions

Preparation and Characterization of Low Density Polyethylene/Ethylene Methyl Acrylate Glycidyl Methacrylate/Organoclay Nanocomposites
Coskunses, Fatma Isik; Yılmazer, Ülkü (Wiley, 2011-06-05)
The effects of organoclay type, compatibilizer, and the addition order of components during melt-blending process on the morphology and thermal, mechanical, and flow properties of ternary nanocomposites based on low-density polyethylene (LDPE) were investigated. As a compatibilizer, ethylene/methyl acrylate/glycidyl methacrylate (E-MA-GMA), as organoclays Cloisites (R) 15A, 25A, and 30B were used. All samples were prepared by a corotating twin screw extruder, followed by injection molding. The highest incre...
Synthesis and characterization of poly(allyl methacrylate) obtained by gamma-radiation
Vardareli, Tugba K.; Usanmaz, Ali (Wiley, 2007-04-15)
Allyl methacrylate was polymerized by gamma-radiation under vacuum in solution and atom transfer radical polymerization (ATRP) methods and also in the presence of atmospheric oxygen in bulk. The kinetic curve is S-type with a longer induction period, because of the presence of oxygen, in bulk polymerization. The curve for the solution polymerization is almost linear with a short induction period. The rate started to decrease after about 60% conversion and reached to a limiting conversion of 100%. The polyme...
Kinetics of polyurethane formation between glycidyl azide polymer and a triisocyanate
Keskin, S; Özkar, Saim (Wiley, 2001-07-25)
Kinetics of the polyurethane formation between glycidyl azide polymer (GAP) and a polyisocyanate, Desmodur N-100, were studied in the bulk state by using quantitative FTIR spectroscopy. The reaction was followed by monitoring the change in intensity of the absorption band at 2270 cm-l for NCO stretching in the IR spectrum, and was shown to obey second-order kinetics up to 50% conversion. The activation parameters were obtained from the evaluation of kinetic data at different temperatures in the range of 50-...
Effect of preparation parameters on performance of dense homogeneous polycarbonate gas separation membranes
Hacarlioglu, P; Toppare, Levent Kamil; Yılmaz, Levent (Wiley, 2003-10-17)
The aim of this study is to determine the effect of preparation parameters on the membrane permeation mechanism and separation performances of dense homogeneous poly(bisphenol A carbonate) (PC) membranes. Blade-casting and drop-casting techniques are used for casting films from solutions with varying concentrations. Chloroform and methylene chloride are used to determine the effect of the properties of the casting solvent. Permeation measurements are done with Ar, N-2, O-2, CH4, CO2, and H, gases. The selec...
Preparation and Comparison of Two Electrodes for Supercapacitors: Pani/CNT/Ni and Pani/Alizarin-Treated Nickel
Koysuren, Ozcan; Du, Chunsheng; Pan, Ning; Bayram, Göknur (Wiley, 2009-07-15)
Polyaniline in emeraldine form was synthesized in the presence of multiwalled carbon nanotubes (CNTs), and the electrochemical capacitance performance of thus formed composite as electrode material has been Studied. The polyaniline/carbon nanotubes (Pani/CNT) composite is found to result in a higher specific capacitance than that of either composite constituent, attributable to the double-layer capacitance behavior of the nanotubes in the Pani/CNT system. However, once assembled into a two-electrode cell, l...
Citation Formats
G. AKINOKTEM and T. TINCER, “PREPARATION AND CHARACTERIZATION OF PERLITE-FILLED HIGH-DENSITY POLYETHYLENES .2. THERMAL AND FLOW PROPERTIES,” JOURNAL OF APPLIED POLYMER SCIENCE, pp. 1115–1122, 1994, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65193.