Analytical estimation of pollution flashhover performances of high voltage insulators.

1980
Demir, Yüksel
Show full item record
105
views
0
downloads
https://hdl.handle.net/11511/6531
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analytical prediction of displacement capacity and length limits of integral bridges
Dicleli, Murat (2006-12-01)
Analytical Simulation of Cyclic Behavior of Steel Braces under Seismic Loads
Dicleli, Murat; Çalık, Ertuğrul Emre (2009-06-22)
Analytical prediction of thermal displacement capacity of integral bridges built on sand
Dicleli, Murat (SAGE Publications, 2005-02-01)
In this research, analytical equations are developed to calculate the lateral displacement capacity and maximum length limits of integral bridges built on sand based on the low-cycle fatigue performance of the piles under cyclic thermal variations and the ultimate strength of the abutment under positive thermal variations. To formulate the displacement capacity and maximum length limits of integral bridges based on the low cycle fatigue performance of steel H-piles under cyclic thermal variations, first, H-...
Analytical examination of performance limits for shear critical reinforced concrete columns
Ergüner, Kamil; Binici, Barış; Department of Civil Engineering (2009)
Most of the older reinforced concrete (RC) buildings have columns that are deficient when the current code requirements are considered. Therefore, performance of the columns determines the performance of the structure under the effects of earthquake induced lateral loads. It is recognized that no provision is proposed in TEC2007 to estimate the failure type called flexure-shear. Behavior of columns having probability of failing in flexure-shear failure mode is mostly underestimated by TEC2007 procedures. In...
Analytical formulation of maximum length limits of integral bridges on cohesive soils
Dicleli, Murat (Canadian Science Publishing, 2005-08-01)
This paper presents an analytical approach for predicting the length limits of integral bridges built on cohesive soils based on the flexural strength of the abutments and the low cycle fatigue performance of the steel H-piles at the abutments under cyclic thermal loading. First, H-piles that can accommodate large inelastic deformations are determined considering their local buckling instability. Then, a damage model is used to determine the maximum cyclic deformations that such piles can sustain. Next, non...
Citation Formats
Y. Demir, “Analytical estimation of pollution flashhover performances of high voltage insulators.,” Middle East Technical University, 1980.
METU IIS - Integrated Information Service open@metu.edu.tr