ANALYSIS OF MILLIMETER WAVE-GUIDES ON ANISOTROPIC SUBSTRATES USING THE 3-DIMENSIONAL TRANSMISSION-LINE MATRIX-METHOD

Date

1993-06-01

Author

BULUTAY, C
PRASAD, S

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

185
views

0
downloads

Three-dimensional condensed asymmetrical node, variable grid, transmission-line matrix (TLM) method has been used in analyzing several millimeter waveguides on anisotropic substrates. The dispersion characteristics of image guides together with field and energy confinement properties at millimeter-wave frequencies have been investigated. Edge coupled microstrip line on a uniaxial substrate is analyzed for the even and odd mode dispersion characteristics. Finally the same analysis is repeated for bilateral fin lines on uniaxial/biaxial substrates. The results obtained using other computational techniques are included in all of these cases to assess the competence of the method.

Subject Keywords

Wave

URI

https://hdl.handle.net/11511/65360

Journal

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES

DOI

https://doi.org/10.1109/22.238536

Collections

Department of Electrical and Electronics Engineering, Article

Suggestions

OpenMETU
Core

Investigation of nonplanar perfectly matched absorbers for finite-element mesh truncation Kuzuoğlu, Mustafa (1997-03-01) In this paper, we present a detailed theoretical and numerical investigation of the perfectly matched layer (PML) concept as applied to the problem of mesh truncation in the finite-element method (FEM), We show that it is possible to extend the Cartesian PML concepts involving half-spaces to cylindrical and spherical geometries appropriate for closed boundaries in two and three dimensions by defining lossy anisotropic layers in the relevant coordinate systems, By using the method of separation of variables,...
LONGITUDINAL ELASTIC-WAVE PROPAGATION AND ENERGY FLUX AT A DISCONTINUITY OF 2 DISSIMILAR SEMIINFINITE CIRCULAR RODS Yıldırım, Raif Orhan (1994-10-01) Elastic wave propagation through an area discontinuity of two dissimilar, bonded, semi-infinite circular rods is investigated analytically. In particular, the variations of the coefficients of stress reflection and transmission are determined in terms of the nondimensional cross sectional area and mechanical impedance parameters. The coefficients of energy flux reflection and transmission are also included. Then, the case is generalized to include a rigid mass attached at the discontinuity.
Time-domain mapping of electromagnetic ray movement inside anisotropic spherical resonator Biber, A; Golick, A; Tomak, Mehmet (2002-09-01) This paper presents the analytical proof of "Time-Domain Mapping Method" for the spherical resonator made up of uniaxial crystal. In this way, the main types of caustics inside the spherical resonator made up of uniaxial crystal, which were investigated numerically before, are confirmed analytically. It is engraved that the problem of the ray flow inside the spherical resonator can be reduced to the problem of the ray flow inside metal cavity shaped as spheroid.
Design and Testing of a Linear Generator for Wave-Energy Applications Hodgins, Neil; Keysan, Ozan; McDonald, Alasdair S.; Mueller, Markus A. (2012-05-01) A linear-generator topology is proposed for wave-energy applications. The main significance of the generator topology is that the relative position of the magnets, copper, and steels has been chosen so that there are no magnetic attraction forces between a stator and a permanent-magnet (PM) translator. The lack of magnetic forces and the modular nature of the generator topology make the manufacture and assembly of the generator easier than a conventional iron-cored PM linear generator. Analytical modeling t...
On-chip optical filters with designable characteristics based on an interferometer with embedded silicon photonic structures Kocaman, Serdar; Panoiu, Nicolae C.; Lu, Ming; Wong, Chee Wei (2012-02-15) We demonstrate chip-scale flat-top filters at near-IR wavelengths using negative index photonic crystal based MachZehnder interferometers. Supported by full three-dimensional numerical simulations, we experimentally demonstrate a new approach for engineering high-pass, low-pass, bandpass, and band-reject filters, based on designing the photonic band diagram both within the bandgap frequency region and away from it. We further show that our approach can be used to design filters that have tunable multilevel ...

Citation Formats

C. BULUTAY and S. PRASAD, “ANALYSIS OF MILLIMETER WAVE-GUIDES ON ANISOTROPIC SUBSTRATES USING THE 3-DIMENSIONAL TRANSMISSION-LINE MATRIX-METHOD,” IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, pp. 1119–1125, 1993, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65360.