Impact Time and Angle Control Against Moving Targets with Look Angle Shaping

2020-05-01
Tekin, Raziye
Erer, Koray S.

Suggestions

Real-Time Attitude-Independent Magnetometer Bias Estimation for Spinning Spacecraft
Söken, Halil Ersin (American Institute of Aeronautics and Astronautics (AIAA), 2018-01-01)
Simulated annealing for missile optimization: Developing method and formulation techniques
Tekinalp, Ozan (American Institute of Aeronautics and Astronautics (AIAA), 2004-07-01)
Hide-and-seek is a continuous simulated annealing algorithm that uses an adaptive cooling schedule. A number of improvements are proposed for the global optimum estimation required for the cooling schedule. To handle equality constraints, two approaches are examined: the rejection method and augmentation of constraints to cost using penalty coefficients. It is demonstrated that a faster convergence is possible if, in the penalty coefficients approach, equality constraints are replaced with tight inequality ...
High-alpha flight maneuverability enhancement of a fighter aircraft using thrust-vectoring control
Atesoglu, Oezguer; Oezgoeren, M. Kemal (American Institute of Aeronautics and Astronautics (AIAA), 2007-09-01)
This study focuses on high-alpha flight maneuverability enhancement of a fighter-bomber aircraft for air combat superiority using thrust-vectoring control. Two basic air superiority maneuvers are studied as test cases, which are the Cobra maneuver with longitudinal motion and the Herbst maneuver with both longitudinal and lateral motions. The necessary mathematical models are built to describe the nonlinear 6-degree-of-freedom flight dynamics, the nonlinear aerodynamics, the engine, and the thrust-vectoring...
Nonlinear time-varying dynamic analysis of a spiral bevel geared system
Yavuz, Siar Deniz; Sarıbay, Zihni Burcay; Ciğeroğlu, Ender (Springer Science and Business Media LLC, 2018-06-01)
In this paper, a nonlinear time-varying dynamic model of a drivetrain composed of a spiral bevel gear pair, shafts and bearings is developed. Gear shafts are modeled by utilizing Timoshenko beam finite elements, and the mesh model of a spiral bevel gear pair is used to couple them. The dynamic model includes the flexibilities of shaft bearings as well. Gear backlash and time variation of mesh stiffness are incorporated into the dynamic model. Clearance nonlinearity of bearings is assumed to be negligible, w...
Nonlinear dynamic analysis of a drivetrain composed of spur, helical and spiral bevel gears
Yavuz, Siar Deniz; Saribay, Zihni Burcay; Ciğeroğlu, Ender (Springer Science and Business Media LLC, 2020-06-01)
This paper proposes a dynamic model for the first time in order to investigate nonlinear time-varying dynamic behavior of a drivetrain including parallel axis gears (such as spur and helical gears) and intersecting axis gears (such as spiral bevel gears). Flexibilities of shafts and bearings are included in the dynamic model by the use of finite element modeling. Finite element models of shafts are coupled with each other by the mesh models of gear pairs including backlash nonlinearity and fluctuating mesh ...
Citation Formats
R. Tekin and K. S. Erer, “Impact Time and Angle Control Against Moving Targets with Look Angle Shaping,” JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, pp. 1020–1025, 2020, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65590.