DESULFURIZATION OF BOLU-GOYNUK LIGNITE USING CUPRIC CHLORIDE

Date

1992-02-01

Author

OGUZ, M
OLCAY, A

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

229
views

0
downloads

Cupric chloride oxidation of Bolu-Goynuk lignite was studied using a four-level factorial design with four process variables: temperature, time. cupric chloride concentration and particle size of the lignite. The main aim was to remove the organic sulphur from the lignite. Maximum organic sulphur removal was achieved by the oxidation of lignite with a particle size of 0.3 mm at 150-degrees-C for 210 min using 50 g CuCl2 per 100 ml of solution.

Subject Keywords

Fuel Technology, Organic Chemistry, Energy Engineering and Power Technology, General Chemical Engineering

URI

https://hdl.handle.net/11511/65666

Journal

FUEL

DOI

https://doi.org/10.1016/0016-2361(92)90009-d

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

SCANNING ELECTRON-MICROSCOPY OF TREATED BITUMINOUS COALS HUAI, HY; GAINES, AF; FLINT, CD (Elsevier BV, 1992-11-01) Scanning electron microscopy of particles of three bituminous coals (78.5% C, 81.7% C and 89.9% C d.a.f.) which had been treated with pyridine, methanol, bromine, air, sulfuric acid, ammonia and alkylating agents showed that the reagents produced significant changes in the morphology of the particles. The particles cracked and disintegrated in ways which appear to be characteristic of the disruption of hydrogen bonding, the volume and thermal changes accompanying local reactions and of the breakage of C-C b...
AIR OXIDATION OF TURKISH BEYPAZARI LIGNITE .2. EFFECT OF DEMINERALIZATION ON STRUCTURAL CHARACTERISTICS IN OXIDATION REACTIONS AT 150-DEGREES-C AZIK, M; YURUM, Y; GAINES, AF (American Chemical Society (ACS), 1994-01-01) Demineralized (HCl/HF) samples of Beypazari lignite were oxidized in air at 150 degrees C for up 120 h in a ventilated oven. Elemental analyses, diffuse reflectance Fourier transform infrared (DRIFT), solid-state C-13 CP/MAS/TOSS NMR, and pyrolysis mass (PY-MS) spectroscopies as well as solvent swelling were used for the characterization of the oxidized and unoxidized samples. It was found that the removal of 90.1% of the mineral matter from Beypazari lignite facilitated the access of oxygen into the coal s...
Thermal Analysis of Crude oil lignite mixtures by Differential Scanning Calorimetry Kök, Mustafa Verşan (Elsevier BV, 1994-04-01) Thermal characterization of lignite, crude oils and their 10 and 20% mixtures were investigated by differential scanning calorimetry (d.s.c.). The calorific value of the lignite increased in mixtures depending on the crude oil type. In pyrolysis runs, temperature ranges where distillation and visbreaking occur were identified for the crude oils studied. The effect of heating rate was also studied, and higher reaction temperatures and higher heat flow rates were observed at d.s.c. peak thermograms with incre...
AIR OXIDATION OF TURKISH BEYPAZARI LIGNITE .1. CHANGE OF STRUCTURAL CHARACTERISTICS IN OXIDATION REACTIONS AT 150-DEGREES-C AZIK, M; YURUM, Y; GAINES, AF (American Chemical Society (ACS), 1993-05-01) The oxidation of Beypazari lignite was carried out in air at 150-degrees-C for up to 168 h. Oxidized samples were withdrawn from a ventilated oven at different periods of time and characterized by elemental analysis, diffuse reflectance Fourier transform infrared (DRIFT), solid-state C-13 CP/MAS/TOSS NMR, and pyrolysis mass (Py-MS) spectroscopies. It was found that oxidation influenced the organic structure and the inorganics at different periods of the oxidation. Iron(II) sulfate was formed in 24 h, during...
NANOSTRUCTURE OF SOOT COLLECTED FROM ETHANOL DROPLET FLAMES IN MICROGRAVITY Park, Seul-Hyun; Choi, Mun Young; Yozgatlıgil, Ahmet (Informa UK Limited, 2009-01-01) The nanostructure of soot particles collected from spherically symmetric ethanol droplet flames were analyzed using a high resolution transmission electron microscopy (HRTEM). Nanostructure properties, including fringe length and curvature of carbon lamellae, were measured for soot particles collected in various inert environments. The sampling experiments were performed in the reduced gravity environments produced in the NASA 2.2 sec Droptower at the Glenn Research Center in Cleveland, Ohio. Microgravity d...

Citation Formats

M. OGUZ and A. OLCAY, “DESULFURIZATION OF BOLU-GOYNUK LIGNITE USING CUPRIC CHLORIDE,” FUEL, pp. 199–202, 1992, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65666.