Peel Bond Strength of Two Silicone Soft Liners to a Heat-cured Denture Base Resin

Date

2011-12-01

Author

DEMİR, HAKAN
DOĞAN, ARİFE
DOĞAN, ORHAN MURAT
Keskin, Selda
Bolayir, Giray
SOYGUN, KORAY

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

193
views

0
downloads

Purpose: This study investigated the peel strength of two different soft liners to a polymethylmethacrylate (PMMA) denture base resin before and after thermocycling.

Subject Keywords

Peel strength, PMMA, Silicone soft liners, Thermocycling

URI

https://hdl.handle.net/11511/68370

Journal

JOURNAL OF ADHESIVE DENTISTRY

DOI

https://doi.org/10.3290/j.jad.a21851

Collections

Test and Measurement Center In advanced Technologies (MERKEZ LABORATUVARI), Article

Suggestions

OpenMETU
Core

Effect of Maleic Anhydride Pretreatment on Tensile Bond Strength of a Silicone Soft Liner to a Denture Base Polymer DEMİR, HAKAN; SOYGUN, KORAY; DOĞAN, ARİFE; Keskin, Selda; DOĞAN, ORHAN MURAT; Bolayir, Giray (2011-10-01) Purpose: To determine the effect of resin surface treatment with dissolved maleic anhydride in butanone added into primer on the tensile bond strength between an acrylic denture base resin and a silicone soft liner.
The Effect of Surface Treatments on Tensile Bond Strength between a Silicone Soft Liner and a Heat-Cured Denture Base Resin SOYGUN, KORAY; Bolayir, Giray; DOĞAN, ARİFE; DEMİR, HAKAN; DOĞAN, ORHAN MURAT; Keskin, Selda (2011-01-01) This study evaluated tensile bond strength of a denture soft lining material to a poly (methylmethacrylate) (PMMA) denture base resin subjected to different surface treatment modalities and thermocycling. The materials tested were a silicone-based liner, Molloplast B (R), and a heat-cured denture base resin, Meliodent (TM). The denture soft lining material was packed against cured PMMA base resin, which was smoothed; sandblasted with 250-mu m Al2O3 particles; or lased with a KTP laser; or against uncured PM...
Bond strength of a silicone soft lining material to poly(methyl methacrylate) resin treated with maleic anhydride and its terpolymers Turgut, Mehmet; Bolayir, Giray; Dogan, Orhan Murat; Keskin, Selda; Dogan, Arife; Boztug, Ali (Informa UK Limited, 2007-01-01) This study investigated the effectiveness of surface treatment of Poly (methyl methacrylate) (PMMA) denture base resin on tensile bond strength between PMMA/silicone-based soft liner. A total of 25 specimens were fabricated and assigned into five groups (n = 5). The surfaces of PMMA were treated with maleic anhydride, maleic anhydride-styrene-vinyl-acetate, n-butylmaleate-styrene-vinyl-acetate, or n-pentamaleate-styrene-vinyl-acetate prior to Primo adhesive primer application and silicone liner placement. T...
Flexural and bonding properties of a denture base polymer treated with nitric acid or ultraviolet radiation before relining with Molloplast-b Dogan, Orhan Murat; Keskin, Selda; Bolayir, Giray; Usanmaz, Ali; Bek, Buelent (Informa UK Limited, 2007-01-01) This study investigated adhesive forces and flexural strength of acrylic resin denture base relined with Molloplast-B soft lining material. To increase bonding between the two materials, the surface of the resin was modified with ultraviolet (UV) irradiation or nitric acid treatment. The peel strength greatly increased with nitric acid treatment because of the high polarity on the poly (methyl methacrylate) (PMMA) surface and the increase in the surface roughness, whereas low peel strength was seen with the...
Examination of 2-methacryloyloxyethyl phosphorylcholine polymer coated acrylic resin denture base material: surface characteristics and Candida albicans adhesion Turkcan, Irem; NALBANT, ASUDE DİLEK; Bat, Erhan; AKCA, GÜLÇİN (2018-07-01) The aim of this study is to evaluate the effects of 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer coating with various concentrations onto acrylic resin denture base material on surface characteristics such as contact angle and surface roughness and on Candida albicans adhesion which is the major factor of denture stomatitis. Specimens, prepared from heat-polymerized acrylic denture base material, were divided into control and three test groups, randomly. Surfaces of the specimens in test groups we...

Citation Formats

H. DEMİR, A. DOĞAN, O. M. DOĞAN, S. Keskin, G. Bolayir, and K. SOYGUN, “Peel Bond Strength of Two Silicone Soft Liners to a Heat-cured Denture Base Resin,” JOURNAL OF ADHESIVE DENTISTRY, pp. 579–584, 2011, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/68370.