Design of wave-digital filters with quantized coefficients.

Date

1983

Author

Memişoğlu, n A Tuğrul

Metadata

Show full item record

Item Usage Stats

89
views

0
downloads

URI

https://hdl.handle.net/11511/6876

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Design of FIR filters with arbitrary magnitude and phase responses and powers-of-two coefficients Çiloğlu, Tolga (1997-06-27) The design of FIR filters with minimal implementation complexity is considered. A method is proposed for the minimization of the total number of power-of-two terms when the magnitude and phase responses are to be specifed arbitrarly. The solution to find the optimal filter gain for these type of filters (non linear-phase) is given.
Design of linear phase FIR digital filters with discrete valued coefficients Çiloğlu, Tolga; Ünver, Baki Zafer; Department of Electrical and Electronics Engineering (1994)
Design and realization of parallel coupled line microwave band pass filters. Uçar, Akın; Department of Electrical and Electronics Engineering (1989)
Design of moving target indication filters with non-uniform pulse repetition intervals İspir, Mehmet; Candan, Çağatay; Department of Electrical and Electronics Engineering (2013) Staggering the pulse repetititon intervals is a widely used solution to alleviate the blind speed problem in Moving Target Indication (MTI) radar systems. It is possible to increase the first blind speed on the order of ten folds with the use of non-uniform sampling. Improvement in blind speed results in passband fluctuations that may degregade the detection performance for particular Doppler frequencies. Therefore, it is important to design MTI filters with non-uniform interpulse periods that have minimum ...
Design of selective linear phase cross-coupled dielectric resonator filters Öztürk, Onur Ozan; Dural Ünver, Mevlüde Gülbin; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2018) In this work, a selective linear phase filter is designed in cross-coupled form using dielectric resonators in Ku band to be used as a channel filter in IMUX of a satellite receiver. Extreme delay flatness is required: 1.5ns delay ripple over 60 % of the passband and symmetric cross-coupled filter with all ideal inverter couplings realizing four finite transmission zeros (FTZ) satisfying also the delay flatness requirements. Design is carried out on the software program FILPRO, then optimized in ADSTM and t...

Citation Formats

n. A. T. Memişoğlu, “Design of wave-digital filters with quantized coefficients.,” Middle East Technical University, 1983.