Design and realization of parallel coupled line microwave band pass filters.

1989
Uçar, Akın

Suggestions

Design and realization of broadband instantaneous frequency discriminator
Pamuk, Gökhan; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2010)
n this thesis, RF sections of a multi tier instantaneous frequency measurement (IFM) receiver which can operate in 2 – 18 GHz frequency band is designed, simulated and partially realized. The designed structure uses one coarse tier, three medium tiers and one fine tier for frequency discrimination. A novel reflective phase shifting technique is developed which enables the design of very wideband phase shifters using stepped cascaded transmission lines. Compared to the classical phase shifters using coupled ...
Design and realization of mixed element broadband bandpass filters
Okşar, İrfan; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2003)
Design and realization of microwave bandstop filters
Dengizek, A. Tevfik; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (1989)
Design and realization of microwave phase shifters
Yenidoğan, Atilla; Koç, S. Sencer; Department of Electrical and Electronics Engineering (1992)
DESIGN AND EVALUATION OF 2 BLOCK CODED MODULATION SCHEMES
SAYRAC, B; YUCEL, MD (1994-04-14)
Presents a study on the design and evaluation of two block coded modulation systems. One of the systems uses a binary construction and quadrature amplitude modulation. The other utilizes a ternary construction and phase modulation. The performance of the two coded schemes are compared theoretically with those of uncoded schemes of the same bandwidth, average power and transmission rate. The ternary scheme is also evaluated practically by computer simulations. Furthermore, the sub-optimum detection algorithm...
Citation Formats
A. Uçar, “Design and realization of parallel coupled line microwave band pass filters.,” Middle East Technical University, 1989.