A high voltage spark gap voltmeter with remote control and measurement .

1983
Sarwar, Javed
Show full item record
161
views
0
downloads
https://hdl.handle.net/11511/6881
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A digital frequency and rate of frequency relay for load shedding.
Egeli, İ Umut; Department of Electrical and Electronics Engineering (1989)
A Reconfigurable Microfluidic Transmitarray Unit Cell
Erdil, Emre; Topalli, Kagan; Zorlu, Ozge; Toral, Taylan; YILDIRIM, ENDER; KÜLAH, HALUK; Aydın Çivi, Hatice Özlem (2013-04-12)
This paper presents a novel microfluidics based approach to develop a reconfigurable circularly polarized transmitarray unit cell. The unit cell comprises double layer nested split ring slots formed as microfluidic channels that can be filled by fluids. Split regions in the slots are realized by injecting liquid metal into the channels. Beam steering is obtained by implementing rotational phase shifting via manipulating the liquid metal in the slots. X-band unit cell prototypes are fabricated on glass subst...
A High throughput parylene microchannel coulter counter for cell sizing and cell counting applications /
Laçin, Özgen Sümer; Külah, Haluk; Department of Electrical and Electronics Engineering (2014)
In medical research, cell counting is of a great importance for the indication of the health status of the patients, diagnosis of the illness, and the detection of the progress of a disease. In clinics, cell counting and sorting is carried out by Coulter Counter devices, in which the electrical potential or resistance change is measured when the cells flow through the defined aperture. Coulter Counter devices perform rapid and accurate analysis of the biological particles in terms of their size and dielectr...
A Compact Electromagnetic Vibration Harvesting System with High Performance Interface Electronics
Rahimi, A.; Zorlu, O.; Muhtaroglu, A.; Külah, Haluk (2011-09-07)
A compact vibration-based electromagnetic (EM) energy harvesting system utilizing high performance interface electronics, has been presented. The energy harvester module consists of an AA-battery sized cylinder tube with an external coil winding, a fixed magnet at the bottom of the tube, and a free magnet inside. The transducer is able to operate at low external vibration frequencies between 9.5 and 12 Hz. The generated AC voltage is converted to DC using a custom rectifier circuit that utilizes a gate cros...
Citation Formats
J. Sarwar, “A high voltage spark gap voltmeter with remote control and measurement .,” Middle East Technical University, 1983.
METU IIS - Integrated Information Service open@metu.edu.tr