Türkiye’de Yığma Binalar İçin Depremsel Risk Haritası Oluşturulması

2005-05-18
Dilsiz, Abdullah
Türer, Ahmet

Suggestions

Seismic vulnerability of masonry structures in Turkey
Ceran, Hasan Burak; Erberik, Murat Altuğ; Department of Civil Engineering (2010)
This study focuses on the evaluation of seismic safety of masonry buildings in Turkey by using fragility curves. Fragility curves for masonry buildings are generated by two behavior modes for load bearing walls: in-plane and out-of-plane. By considering the previous research and site investigations, four major parameters have been used in order to classify masonry buildings with in-plane behavior mode. These are number of stories, strength of load-bearing wall material, regularity in plan and the arrangemen...
The contribution of geographic information system to the urban planning process in Turkey
Kepoğlu, Volkan Osman; Keskinok, Hüseyin Çağatay; Urban Design in City and Regional Planning Department (2003)
This thesis attempts to show the contribution of Geographic Information System to urban planning process in Turkey. GIS can enhance the planning system by providing an access to accurate, reliable and update geographical information, producing alternatives according to the scenario and ensuring participation in the evaluation of the alternatives. This is the high level contribution of GIS for the enhancement of planning. The contribution can occur; if certain conditions are sustained such as establishment o...
Investigation of material properties for the turkish masonry buildings /
Çobanoğlu, Adil Baran; Binici, Barış; Department of Civil Engineering (2014)
Unreinforced masonry construction is still widespread among many urban and rural areas, in developing countries such as Turkey. In order to prevent any loss of lives during an earthquake, ensuring the safety of these buildings is crucial. The buildings which are located in earthquake prone regions should be investigated and assessed so that necessary precautions can be taken. Therefore, several questions and concerns regarding the application of the assessment procedure, the assumptions and risk decision fo...
COMPARATIVE STUDY OF TURKISH EARTHQUAKE CODE 2007 AND TURKISH BUILDING EARTHQUAKE CODE 2018
Asgarov, İsmayıl; Kurç, Özgür; Department of Civil Engineering (2022-11-24)
This thesis compares the complete analysis and design procedure of TEC 2007 and TBEC 2018 for an archetype reinforced concrete building with three different story configurations (three-story, six-story, twelve-story), and the structures are analyzed and designed at three locations in Türkiye (Istanbul, Ankara, Adana). The study focuses on the differences between the defined approaches in the mentioned codes regarding seismic load calculation, finite element model preparation, and reinforced concrete m...
Comparison of mean site-specific response spectra in Turkey with the design spectra of AASHTO
Mestav Sarıca, Gizem; Askan Gündoğan, Ayşegül; Department of Civil Engineering (2014)
Seismic design of bridges is a significant problem for all seismically-active countries including Turkey which has gone through recent destructive earthquakes. Bridges are important elements of transportation and their robustness is important in the aftermath of major earthquakes. Turkish engineers currently employ a modified version of AASHTO (American Association of State Highway and Transportation Officials) LFD Design Specifications for bridge design. Within the scope of a national project (TÜBİTAK 110G...
Citation Formats
A. Dilsiz and A. Türer, “Türkiye’de Yığma Binalar İçin Depremsel Risk Haritası Oluşturulması,” 2005, Accessed: 00, 2021. [Online]. Available: http://www.spim.metu.edu.tr/turkish/makaleler/2.%20Hasan%20Husnu%20Korkmaz.pdf.