Numerical Modelling of Physical Model Experiments on Rubble Mound Breakwaters Under Tsunami Attack Using IHFOAM

2016-11-20
Güler, Hasan Gökhan
Arikawa, Taro
Baykal, Cüneyt
Yalçıner, Ahmet Cevdet

Suggestions

NUMERICAL MODELLING OF SOLITARY WAVE EXPERIMENTS ON RUBBLE MOUND BREAKWATERS
Güler, Hasan Gökhan; Arikawa, Taro; Baykal, Cüneyt; Yalçıner, Ahmet Cevdet (null; 2016-04-16)
Performance of a rubble mound breakwater protecting Haydarpasa Port, Turkey, has been tested under tsunami attack by physical model tests conducted at Port and Airport Research Institute (Guler et al, 2015). It is aimed to understand dynamic force of the tsunami by conducting solitary wave tests (Arikawa, 2015). In this study, the main objective is to perform numerical modelling of solitary wave tests in order to verify accuracy of the CFD model IHFOAM, developed in OpenFOAM environment (Higuera et al, 2013...
Numerical modelling of free surface flows on round vertical slot fish passes
Koçal, Çiğdem; Köken, Mete; Department of Civil Engineering (2019)
Dams and weirs built on the rivers block the flow and prevent fishes from migrating along the river. To overcome this problem, fish passes can be built at those blocked locations along the river by providing a gently sloped channel with low flow rates and enough water depth to allow fish to ascend. Considering the design process, understanding the hydrodynamics inside fish pass structures is important. By using three dimensional numerical simulations, parameters like flow rates, velocity, turbulence and wat...
Numerical simulation of a flapping wing MAV based on wing deformation capture analysis
Tay, Wee Beng; de Baar, Jouke H S; Perçin, Mustafa; Deng, Shuanghou; van Oudheusden, Bas W. (2016-06-14)
Numerical Modelling on Hydrodynamic Flow Conditions and Morphological Changes using XBeach near Manavgat River Mouth
Demirci, Ebru; Baykal, Cüneyt; Güler, Işıkhan; Söğüt, Erdinç; Ergin, Ayşen (null; 2016-11-20)
Numerical simulations of wind turbine wake interactions using actuator line and les models
Önel, Hüseyin Can; Tuncer, İsmail Hakkı; Department of Aerospace Engineering (2019)
Wind is one of the most promising renewable energy resources of the future. After years of optimization studies, Horizontal Axis Wind Turbines shine out as the most efficient type and have been the only model used in large scale commercial wind farms. Layout planning plays an important role in getting the most power out of a wind farm as much as turbine blade design. Most important parameter in this planning phase is the inevitable wake generated by rotors and its impact on other wind turbines which results...
Citation Formats
H. G. Güler, T. Arikawa, C. Baykal, and A. C. Yalçıner, “Numerical Modelling of Physical Model Experiments on Rubble Mound Breakwaters Under Tsunami Attack Using IHFOAM,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/72318.