Hardenability of steels.

1961
Ankara, Alpay
Show full item record
161
views
0
downloads
https://hdl.handle.net/11511/7301
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Fatigue Behavior of Welded API 5L X70 Steel Used in Pipelines
Turhan, Sermin Ozlem; Motameni, Ali; Gürbüz, Rıza (2020-08-01)
In this study, fatigue failure behavior of welded X70 pipeline steel was investigated by rotating bar bending fatigue tests performed at room temperature.S-Ncurves of base metal, weld and heat-affected zone (HAZ) were plotted. Tension tests, hardness measurements and Charpy V-notched impact tests were carried out for mechanical characterization. Samples were examined with optical microscope and scanning electron microscope (SEM) microstructurally. Fracture surfaces were examined with SEM. In addition to fra...
Fatigue behavior of aluminum matrix SiC particulate reinforced composites
Boylu, Kadir Süha; Kaynak, Cevdet; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2001)
Fatigue performance of PVA fibre reinforced cementitious composite overlays
Aleessa Alam, Burhan; Yaman, İsmail Özgür (2019-07-31)
Pavement maintenance and rehabilitation is as much important as the construction work itself. In this scope, applying the correct and efficient repair method is highly critical for economic and technical reasons. Depending on the damage level, many alternative repair methods exist. Using an overlay is one common method, where a new layer can be directly applied over or replace the top part of an existing pavement. This overlay can be made from asphalt or concrete as well. With the advances in the concrete t...
Fatigue performance of engineered cementitious composites
Aleessa Alam, Burhan; Yaman, İsmail Özgür; Department of Civil Engineering (2016)
The maintenance and rehabilitation of a pavement during its service life is as much important as the construction works of this pavement. In this scope, applying the correct and efficient repair method is highly critical for economic and technical reasons. Depending on the damage level of the pavement, there are many different methods that can be used to repair the pavement. The use of an overlay is one of the most common methods, where a new layer can be applied directly over or replace the top part of an ...
Corrosion characteristics of metallic glasses.
Alanyalıoğlu, T Alp; Department of Metallurgical Engineering (1986)
Citation Formats
A. Ankara, “Hardenability of steels.,” Middle East Technical University, 1961.
METU IIS - Integrated Information Service open@metu.edu.tr