Design requirements for intermediate ring stiffeners on discretely supported cylindrical steel shells

Date

2016-06-01

Author

Zeybek, Özer
Topkaya, Cem
Rotter, John Michael

Metadata

Show full item record

Item Usage Stats

44
views

0
downloads

URI

https://hdl.handle.net/11511/73626

Conference Name

The International Colloquium on Stability and Ductilityof Steel Structures – SDSS 2016

Collections

Department of Civil Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Design Criteria for Intermediate Ring Stiffeners on Discretely Supported Cylindrical Shells Zeybek, Özer; Topkaya, Cem; Rotter, Michael (null; 2015-07-22)
Design rules for suspending concentrated mixtures of solids in stirred tanks Ayrancı Tansık, İnci (2011-10-01) This study examines complete off-bottom suspension conditions for slurries containing mixtures of solids at a wide range of concentrations. Binary combinations of five different particles; bronze, two sizes of glass beads, ion exchange resin, and nickel were tested with two impellers: the Lightnin A310 and the down pumping 45 degrees PBT. The effect of particle size ratio and density ratio of the two solid phases on N(js) was investigated. Solids loadings were varied from 3 to 56 wt% (weight percent) with w...
Design Optimization of Variable Stiffness Composite Laminates Using Surrogate Models for Compliance and Buckling Load İnci, Hasan; Kayran, Altan (2017-09-22) Usage of composite materials in aerospace industry has never been so wide in our world. Starting from the development of composites, the analyses were only done for straight fiber composites. With the improved manufacturing capabilities, designers have the ability to design more complex shapes for composites, which allows more efficient structures. In the past two decades, variable stiffness (VS) composite laminates are introduced to the literature. Within these two decades, researchers working on VS concep...
Design optimization of variable frequency driven three-phase induction motors Ertan, B; Leblebicioğlu, Mehmet Kemal; Simsir, B; Hamarat, S; Cekic, A; Pirgaip, M (1998-01-01) An approach to optimize the design of three-phase induction motors for a wide speed range drive is considered. Two operating points in the speed range are taken into consideration. The problem is handled as a constrained optimization problem. An accurate model for the motor in terms of its dimensions has been developed which predicts the motor performance based on about 60 parameters of motor geometry.
Design Studies of Axial Vircator for High Power Microwave Generation KÜÇÜK, İBRAHİM SEMİH; TİMUR, BÜŞRA; Tanc, Zafer; Demir, Şimşek (2017-09-27) This paper presents design and simulation results of the cylindrical axial virtual cathode oscillator which is frequently used to damage electronic equipment by generating High Power Microwaves (HPM). Simulations are performed in MAGIC Tool Suite which uses FDTD-PIC algorithm to solve particle beam and field interactions. During the design procedure, AK Gap is changed from 5 mm to 12 mm and the scaling law is verified by simulation results. 9 mm AK gap values are selected as the most suitable one when outpu...

Citation Formats

Ö. Zeybek, C. Topkaya, and J. M. Rotter, “Design requirements for intermediate ring stiffeners on discretely supported cylindrical steel shells,” presented at the The International Colloquium on Stability and Ductilityof Steel Structures – SDSS 2016, 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/73626.