Microcontroller Controlled Multifrequency Electrical Impedance tomograph

2001-10-01

Suggestions

Microcontroller controlled, multifrequency electrical impedance tomograph
Arpınar, VE; Eyüboğlu, Behçet Murat (2001-10-28)
In this study, development of a microcontroller controlled multifrequency electrical impedance tomography system is aimed. In this system, current injection and voltage measurements are both performed by the surface electrodes, which are microcontroller controlled. Data acquisition system process the measured signal using continuous time quadrature demodulator. After that, it converts analog information to digital and transfers it to the PC.
Microcontroller-based multiport communication system for digital electricity meters
Beştepe, Fırat; Güran, Hasan; Department of Electrical and Electronics Engineering (2004)
This thesis explains the design of a microcontroller-based device, which provides an efficient and practical alternative for the remote reading of digital electricity meters over Public Switch Telephone Network (PSTN). As an alternative application, a system is constructed providing file transfer capability to the PC connected to the port of implemented device in addition to remote reading of digital electricity meters. This thesis also provides detailed explanations about the basics of serial asynchronous ...
Microcomputer control of linear motion of a lathe cutting tool.
Dalgıç, Aykut; Department of Electrical Engineering (1983)
Microcontroller based frequency synthesizer for FM receiver
Kılıç, Muhsin; Güran, Hasan; Department of Electrical and Electronics Engineering (1991)
Micromachined accelerometers for inertial navigation applications
Chae, Junseok; Külah, Haluk; Najafi, Khalil (2005-01-01)
This paper presents research at The University of Michigan on micromachined accelerometers and their interface electronics to satisfy the requirements for inertial navigation applications. The accelerometer systems developed employ in-plane (lateral), out-of-plane (z-axis), and single-chip 3-axis sensors with the interface electronics. The interface electronics forms a second-order electromechanical sigma-delta modulator together with the sensor and the system can be operated in both open and closed-loop. T...
Citation Formats
E. Arpınar and B. M. Eyüboğlu, “Microcontroller Controlled Multifrequency Electrical Impedance tomograph ,” 2001, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/73812.