Development of Graphene Oxide Polymer Based Aerogels

Date

2016-07-17

Author

Doğan, Öznur
Bat, Erhan

Metadata

Show full item record

Item Usage Stats

56
views

0
downloads

URI

https://hdl.handle.net/11511/74253

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Development of Graphene Oxide based Aerogels Doğan, Öznur; Bat, Erhan (null; 2016-07-11)
Development of graphene oxide based aerogels Doğan, Öznur; Bat, Erhan; Department of Chemical Engineering (2017) Owing to their large surface area, high hydrophobicity and porous structure, graphene oxide based aerogels have been proposed as feasible and economic solutions for the increasing water pollution caused by crude oils, petroleum products and toxic organic solvents. In this study, graphene oxide based aerogels were prepared via two different routes. In the first route, random copolymers of glycidyl methacrylate and styrene were used as crosslinkers in the aerogel. In the second route, 1,3-diaminopropane was u...
Development of organic-inorganic composite membranes for fuel cell applications Erdener, Hülya; Baç, Nurcan; Department of Chemical Engineering (2007) Hydrogen is considered to be the most promising energy carrier of the 21st century due to its high energy density and sustainability. The chemical energy of hydrogen can be directly converted into electricity by means of electrochemical devices called fuel cells. Proton exchange membrane fuel cells (PEMFC) are the most preferred type of fuel cells due to their low operating temperatures enabling fast and easy start-ups and quick responses to load changes. One of the most important components of a PEMFC is t...
Development of piezoelectric ceramics for ultrasonic motor applications Kalem, Volkan; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (2011) This study has been carried out to develop and manufacture piezoelectric ceramic materials which are utilized for ultrasonic motor (USM) applications. For this purpose, the effect of compositional modifications on the dielectric and piezoelectric properties of lead zirconate titanate (PZT) based ceramics was investigated. PZT based powders were produced using the mixed oxide method. The base composition was selected as Pb(Zr0.54Ti0.46)O3. The samples in the proximity of morphotrophic phase boundary were dop...
Development of high temperature creep resistant aluminium based sand cast magnesium alloys Yalınız, Emrah; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2018) The aim of this thesis is to develop alternative sand casting aluminum based magnesium alloys to substitute current sand castable helicopter transmission housing magnesium alloys such as ZE41A and EV31A. AZ91 magnesium alloy has also been preferred for helicopter transmission housing material. However, the lower creep resistance above 120 oC due to the presence of -(Mg17Al12) phase in the microstructure and showing varying mechanical properties in different section thicknesses limit the usage of AZ91 in th...

Citation Formats

Ö. Doğan and E. Bat, “Development of Graphene Oxide Polymer Based Aerogels,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/74253.