Instrumentaiton and measurement for the SO2 retention material and ebergy in a fluidized bed lignite combustor.

1985
Aykaç, Arif

Suggestions

Analytical estimation of pollution flashhover performances of high voltage insulators.
Demir, Yüksel; Department of Electrical Engineering (1980)
Experimental petrology of potassium-rich alkaline lavas: Multiply saturated liquidus phase relations
Çamur, Mehmet Zeki (null; 1996-08-14)
Experimental determination of complex modulus of elasticity of viscoelastic materials.
Bakiler, T. Celal; Department of Mechanical Engineering (1984)
Experimental determination of tool wear in routing and trimming of CFRP composites
Peker, Zühal; Akkök, Metin; Kılıç, S. Engin; Department of Mechanical Engineering (2015)
In order to fulfill growing demand for lighter aircraft, Carbon fiber reinforced polymers (CFRP) have been developed, which differ from metals with regards to their machinability characteristics. The main problem in machining process is the damage caused by delamination of CFRP materials which need to be both cut and shorn of fibers at the same time, since they are remarkably abrasive in nature. This research aims at accessing the most appropriate cutting condition with less tool wear in routing and trimmin...
Analytical prediction of thermal displacement capacity of integral bridges built on sand
Dicleli, Murat (SAGE Publications, 2005-02-01)
In this research, analytical equations are developed to calculate the lateral displacement capacity and maximum length limits of integral bridges built on sand based on the low-cycle fatigue performance of the piles under cyclic thermal variations and the ultimate strength of the abutment under positive thermal variations. To formulate the displacement capacity and maximum length limits of integral bridges based on the low cycle fatigue performance of steel H-piles under cyclic thermal variations, first, H-...
Citation Formats
A. Aykaç, “Instrumentaiton and measurement for the SO2 retention material and ebergy in a fluidized bed lignite combustor.,” Middle East Technical University, 1985.