Olgun Yılmaz, Metehan Erdoğan, İshak Karakaya, Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings, Metal-Matrix Composites Innovations, Advances and Applications

Date

2018-03-15

Author

Yılmaz, Olgun
Karakaya, İshak

Metadata

Show full item record

Item Usage Stats

136
views

0
downloads

Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and the amount of Al2O3 powder in the electrolyte on the mechanical and tribological properties like hardness, friction coefficient, wear rate, and the amount of deposited Al2O3 were investigated.

URI

http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/14681138425C1E968525814F004A828F?OpenDocument
https://hdl.handle.net/11511/74706

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings, Metal-Matrix Composites Innovations, Advances and Applications Yılmaz, Olgun; Karakaya, İshak (null; 2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Epoxy-based composites and coatings: improvement of multifunctional properties Çaldıklıoğlu, Almira; Bayram, Göknur; Department of Chemical Engineering (2019) The purposes of this study are to improve mechanical properties, thermal stability, resistance to flammability, electrical conductivity and hydrophobicity of epoxy (E) by incorporation of expanded graphite (EG) and titanium dioxide (T) particles. In this study, sonication with the use of solvent method was primarily determined for the epoxy-based binary composite and coating preparation. By this method, the epoxy composites and coatings were produced by changing EG concentration as 0.05, 0.1, 0.25, 0.5, 0.7...
Polystyrene / boron nitride nanotube composites: synthesis, processing and characterization Balık, Erdem; Bayram, Göknur; Sezgi, Naime Aslı; Department of Chemical Engineering (2015) In recent years, boron nitride nanotubes (BNNTs) have been added to polystyrene (PS) which is a widely used thermoplastic polymer in order to improve its thermal and mechanical properties. Solution mixing and melt blending techniques are commonly used methods to prepare polymer-boron nitride nanotube (BNNT) composites. However, these two composite preparation methods have a common problem about the dispersion of fillers in the polymer matrix. In this study, PS-BNNT composites were prepared using masterbatch...

Citation Formats

O. Yılmaz and İ. Karakaya, “Olgun Yılmaz, Metehan Erdoğan, İshak Karakaya, Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings, Metal-Matrix Composites Innovations, Advances and Applications,” 2018, Accessed: 00, 2021. [Online]. Available: http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/14681138425C1E968525814F004A828F?OpenDocument.