Evaluation of Water Quality within the Watershed of Porsuk Dam Reservoir

2013-10-01
Yenilmez, Firdes
Aksoy, Ayşegül
Department of Environmental Engineering
17th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region, (September 28 - October 1, 2013)

Suggestions

Experimental investigation of the confinement effects in radial-radial swirlers
Kiyici, Firat; Perçin, Mustafa (2021-01-01)
© 2021 American Society of Mechanical Engineers (ASME). All rights reserved.This experimental study investigates the effect of confinement ratio (CR) on the flow field of a counterrotating radial-radial swirler. Two-dimensional twocomponent (2D2C) particle image velocimetry (PIV) measurements are performed at the mid-plane of the jet. Four different confinement ratios (i.e., 10.4, 23.4, 41.6 and unconfined) are considered at a swirl number of 1.2. The results reveal the presence of a central toroidal recirc...
Geotechnical engineering education in METU and computer aided learning resources
Çokça, Erdal (2008-06-04)
In this paper, the state-of-practice in undergraduate geotechnical engineering (Soil Mechanics and Foundation Engineering) education in the Department of Civil Engineering of the Middle East Technical University (METU CE) is given. The use of computers in undergraduate courses is becoming a more widespread form of teaching in geotechnical engineering education. This paper also presents a list of web resources (e.g. PC Programs, web-based resources, cd-rom resources) currently available in geotechnical engin...
Estimation of hazardous waste generation in selected sectors of Ostim OIZ, Ankara
Kayabınar, Arzu; Dilek, Filiz Bengü; Department of Environmental Engineering (2010)
In this study, Hazardous Waste Production potential for the selected priority sectors in OSTIM Organized Industrial Zone (OIZ), Ankara is investigated. A general inventory study is conducted based on both absolute and minor entries in Waste List of Regulation on General Principles of Waste Management, Annex 4. Processes included in priority sectors are identified; moreover, each process is analyzed in terms of inputs entering and outputs leaving. Generated hazardous wastes from each sector are classified as...
Developing a strategic information system for construction companies
Güneş, Tanyeli; Dikmen Toker, İrem; Department of Civil Engineering (2008)
Problems and issues at project level have been the main concern of the construction management studies and construction professionals. Consequently, the long-term strategic issues at corporate level remained uncovered in construction companies. The complex and unique characteristics of the industrial context of construction also limited the adoption of strategic management concepts by the companies. Recently, however, changing business environment, increasing competition in construction arena and higher cli...
Utilization of Curve Offsets in Additive Manufacturing
HASELTALAB, Vahid; Yaman, Ulaş; Dölen, Melik (2018-04-25)
Curve offsets arc utilized in different fields of engineering and science. Additive manufacturing, which lately becomes an explicit requirement in manufacturing industry, utilizes curve offsets widely. One of the necessities of offsetting is for scaling which is required if there is shrinkage after the fabrication or if the surface quality of the resulting part is unacceptable. Therefore, some post-processing is indispensable. But the major application of curve offsets in additive manufacturing processes is...
Citation Formats
F. Yenilmez and A. Aksoy, “Evaluation of Water Quality within the Watershed of Porsuk Dam Reservoir,” presented at the 17th International Symposium on Environmental Pollution and its Impact on Life in the Mediterranean Region, (September 28 - October 1, 2013), İstanbul, Türkiye, 2013, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75448.