Dynamic simulation of planar mechanical systems.

1975
Eskicioğlu, Hakkı
Show full item record
93
views
0
downloads
https://hdl.handle.net/11511/7565
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Dynamic analysis of fluid-pier interaction.
Demirci, Yusuf; Department of Civil Engineering (1985)
DYNAMIC MODELING AND CONTROL OF AN ELECTROMECHANICAL CONTROL ACTUATION SYSTEM
Yerlikaya, Umit; Balkan, Raif Tuna (2017-10-13)
Electromechanical actuators are widely used in miscellaneous applications in engineering such as aircrafts, missiles, etc. due to their momentary overdrive capability, long-term storability, and low quiescent power/low maintenance characteristics. This work focuses on electromechanical control actuation systems (CAS) that are composed of a brushless direct current motor, ball screw, and lever mechanism. In this type of CAS, nonlinearity and asymmetry occur due to the lever mechanism itself, saturation limit...
Dynamic modeling and control of an electromechanical control actuation system
Yerlikaya, Ümit; Balkan, Raif Tuna; Department of Mechanical Engineering (2016)
Electromechanical simulators, actuators are widely used in miscellaneous applications in engineering such as aircrafts, missiles, etc. These actuators have momentary overdrive capability, long-term storability and low quiescent power/low maintenance characteristics. Thus, electromechanical actuators are applicable option for any system in aerospace industry, instead of using hydraulic actuators. In the same way, they can be used in control actuation section of missiles to deflect flight control surfaces. Mo...
Dynamic analysis and control of a self excited induction generator
Özkazanç, Yakup Sabri; Demirekler, Mübeccel; Department of Electrical and Electronics Engineering (1988)
Dynamic modelling and analysis of split-torque face-gear systems
Aydoğan, Mustafa Özgür; Özgüven, Hasan Nevzat; Sarıbay, Zihni B.; Department of Mechanical Engineering (2022-8-29)
In this study it is aimed to develop a dynamic model for a face-gear drive system that accounts for all important physical parameters related to the operation to achieve an optimized split-torque face-gear based transmission system. With this new model, nonlinear dynamic response of a face-gear drive system is sought and dynamic stability and limit states of this structure are investigated. The main motivation for the current study is the recent development and utilization of face-gear drive...
Citation Formats
H. Eskicioğlu, “Dynamic simulation of planar mechanical systems.,” Middle East Technical University, 1975.
METU IIS - Integrated Information Service open@metu.edu.tr